Electrical & Lighting
Milwaukee M18™ LED Stand Light
M18 SAL-0
• Three light output modes for optimal brightness and runtime
• High Mode: 2,000 lumens for up to 4 hours with M18™ XC 5.0 Pack
• Medium Mode: 1,300 lumens for up to 6 hours with M18™ XC 5.0 Pack
• Three light output modes for optimal brightness and runtime
• High Mode: 2,000 lumens for up to 4 hours with M18™ XC 5.0 Pack
• Medium Mode: 1,300 lumens for up to 6 hours with M18™ XC 5.0 Pack
Download
Products Lainnya
M12 AL-0
• Five high performance LEDs provide 1000 Lumens of light output replacing 250 W halogen lights
• Integrated magnets, clamping mechanism, and key hole for screws / nails provide multiple mounting options for different surfaces
• 3 output modes for optimal brightness and runtime
• Five high performance LEDs provide 1000 Lumens of light output replacing 250 W halogen lights
• Integrated magnets, clamping mechanism, and key hole for screws / nails provide multiple mounting options for different surfaces
• 3 output modes for optimal brightness and runtime
Features:
• Super bright white 18 x 0.5 SMD LED.
• 3.7V 2200mAh Li-on Battery.
• 360° swivel hanging Hook.
• Integrated magnet on rear.
• USB and micro USB ports.
• 110-240V AC/DC charger with 1.5m micro cable.
• Two lighting modes: High (100%) on and Low (30%) on.
• Operating time: 2 hours.
• charging time: 5 hours.
• Impact resistance (drop test) 1m.
• Operating temperature: -20 - 50°C.
• IPX-4 waterproof and designed for outside use in heavy rain.
• Super bright white 18 x 0.5 SMD LED.
• 3.7V 2200mAh Li-on Battery.
• 360° swivel hanging Hook.
• Integrated magnet on rear.
• USB and micro USB ports.
• 110-240V AC/DC charger with 1.5m micro cable.
• Two lighting modes: High (100%) on and Low (30%) on.
• Operating time: 2 hours.
• charging time: 5 hours.
• Impact resistance (drop test) 1m.
• Operating temperature: -20 - 50°C.
• IPX-4 waterproof and designed for outside use in heavy rain.
Air Circuit Breaker (ACB) is one type of electrical protection device commonly used in electrical systems. Air Circuit Breaker is an electrical protection device used to cut off the flow of electricity in an electrical circuit when there is a disturbance or excess current. This tool is generally used in industrial electrical panels and can be used in electrical systems with quite high voltage.
Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.
The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.
Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.
The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.
KLF010
Eco friendly COB LED boasts low power consumption, 90% energy saving when compared with ordinary floodlights. Supplied with steel stand and has an adjustable head to light up out of reach areas. Beam angle of 120°. Aluminium die-cast alloy body with stainless steel external fixings and toughened glass. Suitable for outdoor use with IP65 rating. 2 chargers included (12V & 240V) along with 4 types of universal international plug adaptors. 5 hours charging time.
Features and Benefits
• Eco friendly 10W COB LED equivalent to 100W halogen
• Steel stand and an adjustable head to light up out of reach areas
• Beam angle of 120°
• Aluminium die-cast alloy body with stainless steel external fixings and toughened glass
• Suitable for outdoor use with IP65 rating. Two chargers included (12V & 240V) along with 4 types of universal international plug adaptors
Technical Information
• Dimensions (H x W x D): 250 x 145 x 165mm.
Eco friendly COB LED boasts low power consumption, 90% energy saving when compared with ordinary floodlights. Supplied with steel stand and has an adjustable head to light up out of reach areas. Beam angle of 120°. Aluminium die-cast alloy body with stainless steel external fixings and toughened glass. Suitable for outdoor use with IP65 rating. 2 chargers included (12V & 240V) along with 4 types of universal international plug adaptors. 5 hours charging time.
Features and Benefits
• Eco friendly 10W COB LED equivalent to 100W halogen
• Steel stand and an adjustable head to light up out of reach areas
• Beam angle of 120°
• Aluminium die-cast alloy body with stainless steel external fixings and toughened glass
• Suitable for outdoor use with IP65 rating. Two chargers included (12V & 240V) along with 4 types of universal international plug adaptors
Technical Information
• Dimensions (H x W x D): 250 x 145 x 165mm.