a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Abrasive

York Flap Disc, 100 x 16mm, Conical (Type 29), P40, Aluminium Oxide

Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive.

Features and Benefits
• The overlap design reduces clogging and ensures the disc always cuts effectively and
• Provides a consistent finish throughout disc life
• No backing pads needed

Notes
• Safe to use at 80m/s on any grinder

Standards
EN12413
Download
Products Lainnya
SB0186CT Sanding Band 60 x 30mm P80 Aluminium Oxide
York SB0186CT, Sanding Band, 60 x 30mm, P80, Aluminium Oxide
Spiral wound with tear-resistant backing fabric.

Features and Benefits
• For grinding and finishing edges, profiles, welded seams.
• To be used on designated rubber drum holder
• Maximum permitted peripheral speed of 30m/s
• P60 = Coarse, P80 = Medium, P150 = Fine.

Notes
• IMAGES FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

Coated Roll Economy 38mm x 50m Aluminium Oxide P150
Kennedy Coated Roll, Economy, 38mm x 50m, Aluminium Oxide, P150
38mm x 50m Rolls.
Blue twill economy emery is "glue bonded" to a very flexible J-weight blue twill cloth. Suitable for general purpose, light duty workshop use.
W170 MOUNTED POINT
Kennedy W170 MOUNTED POINT
Ideal for off-hand grinding and deburring, the 'W' shape mounted points from Kennedy® make excellent work of medium and heavy stock. The aluminium oxide abrasive is a naturally sourced abrasive that produces less dust while effectively removing stock as required.

Features and Benefits
• All points are aluminium oxide with rubenite™ as standard - perfect for all general-purpose grinding and deburring on steels and most metals
• Designed for reliability
• Non-toxic abrasive

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
• Compatible with the Kobe® FDG180m Straight Die Grinder

GRINDING STONE 150 X20MM 3213MM BORE A36Q COARSE
Sealey GRINDING STONE Ø150 X20MM Ø32(Ø13)MM BORE A36Q COARSE
These high-quality bench grinding wheels are ideal for a wide range of material applications. Designed to fit on all leading brand machines, they provide an excellent performance to all projects.

Features and Benefits
• Suitable for all-purpose applications
• High hardness levels for consistent results

Typical Applications
• Sharpening
• Deburring
• Rust removal

Standards
• EN 12413

Warnings
• Not permitted for wet grinding

Notes
• All 150mm grinding stones fit 13mm bore sizes with 32-13mm diameter reduction bushes supplied where necessary