Tools & Chemicals
Kennedy Hex Key, L-Handle, Hex Ball, Metric, 1.5-10mm, 9-piece
Manufactured from fully hardened carbon steel in accordance with DIN 911, these metric hex key sets from Kennedy are the simple way to possess the most frequently required sizes of hex key. Supplied in a handy plastic clip to keep them in one place, these hex keys have precision cut ends and accurate across flat (AF) dimensional tolerances to ensure maximum socket contact. The ball ends allow up to 30° work offset. The long arm end of the product is ball drive and short arm end is plain, making them truly versatile, and they are available as a set of 7 or 9.
Features and Benefits
• Ball end allows up to 30° work offset to work in hard-to-reach areas
• Manufactured from fully hardened carbon steel making it a durable product
• Black oxidised finish to bolster resistance to corrosion and wear and tear
• Supplied in a plastic storage clip providing easy access
• Available as a 7 or 9 piece set depending on your specific needs
Contents
• Metric 7 Piece Set Contents: 1.5, 2, 2.5, 3, 4, 5 and 6mm
• Metric 9 Piece Set Contents: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
Typical Applications
• Ideal for use when faced with any hexagon head sockets and nuts, which are particularly found in flat pack furniture and bicycles
Features and Benefits
• Ball end allows up to 30° work offset to work in hard-to-reach areas
• Manufactured from fully hardened carbon steel making it a durable product
• Black oxidised finish to bolster resistance to corrosion and wear and tear
• Supplied in a plastic storage clip providing easy access
• Available as a 7 or 9 piece set depending on your specific needs
Contents
• Metric 7 Piece Set Contents: 1.5, 2, 2.5, 3, 4, 5 and 6mm
• Metric 9 Piece Set Contents: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
Typical Applications
• Ideal for use when faced with any hexagon head sockets and nuts, which are particularly found in flat pack furniture and bicycles
Download
Produk Lainnya
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. Six point bi-hexagon side drive design gives a higher torque than normal sockets, grips worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium-free. Chamfered leading edge ensures easy fastener location. Sold as a 29 piece set with metric and imperial sockets.
Features and Benefits
• Mirror finish repels dirt as well as looking aesthetically clean
• Chrome vanadum steel construction makes the product hardy
• Supplied in a snap shut red case to keep all your components together
• Delivers high torque with the double knurl design and side drive
Typical Applications
• Automotive
• Construction
• Repairs
• DIY
Features and Benefits
• Mirror finish repels dirt as well as looking aesthetically clean
• Chrome vanadum steel construction makes the product hardy
• Supplied in a snap shut red case to keep all your components together
• Delivers high torque with the double knurl design and side drive
Typical Applications
• Automotive
• Construction
• Repairs
• DIY
These insulated needle nose pliers are especially suitable for production line environments where repetitive work is undertaken. With a double polished head and joint with induction hardened cutting edges, the product is available in various sizes to suit your requirements. VDE protected up to 1000V.
Features and Benefits
• Available in various sizes to suit your requirements
• Serrated jaws offer superior gripping force with minimal user effort
• Insulated handles up to 1000V with slip guards improve user control and grip as well as protection
• Induction hardened cutting edges provide accurate and precise work
• Double polished head and joint makes for an easier tool clean
Typical Applications
• Electrical
• Construction
• Plumbing
Standards
• DIN EN IEC 60900
Features and Benefits
• Available in various sizes to suit your requirements
• Serrated jaws offer superior gripping force with minimal user effort
• Insulated handles up to 1000V with slip guards improve user control and grip as well as protection
• Induction hardened cutting edges provide accurate and precise work
• Double polished head and joint makes for an easier tool clean
Typical Applications
• Electrical
• Construction
• Plumbing
Standards
• DIN EN IEC 60900
Hi-Grip Pound Thru Flat Head Screwdrivers, Flared Tip with a hexagon blade suitable for hammer striking. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head
Features and Benefits
• Chrome vanadium steel blades for durability
• Striking heads, suitable for striking with a hammer to free up seized screws
• Magnetic tips for easy screw alignment
• Moulded grip for user comfort
Typical Applications
• Construction
• Electrical
• DIY
Standards
• DIN ISO 2380
Features and Benefits
• Chrome vanadium steel blades for durability
• Striking heads, suitable for striking with a hammer to free up seized screws
• Magnetic tips for easy screw alignment
• Moulded grip for user comfort
Typical Applications
• Construction
• Electrical
• DIY
Standards
• DIN ISO 2380
Set of 4 engineer's files fitted with ergonomically designed handles for a comfortable improved grip. Files are manufactured from T12 carbon steel, hardened and tempered to ensure a long lasting tool. Supplied in a woven wallet for easy storage.
Standards Met
• Manufactured to BS498:1990 and American Federal Standard GGG-F325B.
Features and Benefits
• Ergonomic grip with anti-slip finger placement pads ensures the tool stays tight and comfortable in your hand
• Lanyard hole in handle for extra protection when working at height
• Second cut teeth for quick and efficient removal of moderate material
• Woven wallet designed for easy removal and storage
Notes
• Sets available in 6"" (150mm), 8" (200mm) and 10" (250mm) versions
• Set contains Hand, Flat, Round and Half Round second engineer's files
Standards Met
• Manufactured to BS498:1990 and American Federal Standard GGG-F325B.
Features and Benefits
• Ergonomic grip with anti-slip finger placement pads ensures the tool stays tight and comfortable in your hand
• Lanyard hole in handle for extra protection when working at height
• Second cut teeth for quick and efficient removal of moderate material
• Woven wallet designed for easy removal and storage
Notes
• Sets available in 6"" (150mm), 8" (200mm) and 10" (250mm) versions
• Set contains Hand, Flat, Round and Half Round second engineer's files