a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Tools & Chemicals

Kennedy Chipping Hammer, 7oz., Spring Steel Shaft, Corrosion-resistant

Designed for boiler scaling, weld dressing and chipping away slag after arc welding, this welders chipping hammer is highly resilient. Manufactured from hardened and tempered steel with a spring steel impact absorbing shaft, the hammer possesses chisel edge and point striking faces with an epoxy coating.

Features and Benefits
• Epoxy coating further protects the product from wear and tear
• Chisel edge and point striking faces allow for versatility of use
• Spring steel handle is impact absorbing to protect the user from hand and wrist fatigue
• Hardened and tempered steel head is extremely hardy

Typical Applications
• Welding
• Construction
Download
Produk Lainnya
Pound Thru Flat Head Screwdriver Slotted 6mm x 150mm
Kennedy Pound Thru Flat Head Screwdriver Slotted 6mm x 150mm
Hi-Grip Pound Thru Flat Head Screwdrivers, Flared Tip with a hexagon blade suitable for hammer striking. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head

Features and Benefits
• Chrome vanadium steel blades for durability
• Striking heads, suitable for striking with a hammer to free up seized screws
• Magnetic tips for easy screw alignment
• Moulded grip for user comfort

Typical Applications
• Construction
• Electrical
• DIY

Standards
• DIN ISO 2380
High Speed Steel Saw Blade For Hacksaw 533mm
Kennedy High Speed Steel, Saw Blade, For Hacksaw, 533mm
Manufactured from High-Speed Steel (HSS), these power saw blades are recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Due to the thin nature of the blades, the product should be used only on light machines. Available in a range of sizes to suit your needs.

Features and Benefits
• Recommended for cutting thin cross-sections due to the accuracy of the blades
• High Speed Steel (HSS) construction makes fast and precise cuts for a smooth finish
• For cutting tubing, small bars and light angle iron for versatile use
• Should be used only on light duty machines
• Available in a range of sizes and specifications to suit your needs

Typical Applications
• DIY
• Automotive
• Plumbing
• Construction

Notes
• Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2in.)
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4in. to 3/4in.)
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16in. to 1in.)
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2in. to 1 1/2in.)
TPI: 4. Suitable for Section Width: 19mm and above (3/4in. and above)
Super Degreaser Plus Degreaser 17 Wt Oz 03109
CRC Super Degreaser™ Plus Degreaser, 17 Wt Oz 03109
This high performance, industrial strength formula quickly dissolves grease, oil and sludge. It has no flash evaporates rapidly and leaves no residue. This product is non-corrosive and non-staining.

Applications
Air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators & compressors.
Size 2 Polypropylene File Handle 130mm
Kennedy-Pro Size 2, Polypropylene, File Handle, 130mm
Bi-Material File Handle.
Polypropylene file handles with integral hanging hole and covered with a ribbed rubber grip for increased purchase and added comfort.

Features and Benefits
• Black/Red colouring
• Polypropylene
• Ribbed rubber handle grip
• Integral hanging hole

Notes
• Available in three sizes: 0, 1 and 2