Drager VarioGard® 3300 IR Transmitter

The Dräger VarioGard® 3300 IR is a digital transmitter with an integrated infrared optical DrägerSensor®. It detects the flammable gases methane and LPG in the ambient air. This affordable system component makes it easier for you to configure a gas warning system.

Digital function
The Dräger VarioGard 3300 IR is connected with the controller via a digital VarioGard bus. This is how it is supplied with electricity and how it transmits its measuring results. You can easily control the entire VarioGard system via the VarioGard bus.

High reliability
The VarioGard 3300 IR is equipped with an infrared optical DrägerSensor. This sensor measures the concentration of flammable gases in the ambient air. The measured values are transmitted digitally to the controller and displayed there. An alarm is triggered if the gas concentration exceeds one or more of the configured limit values.

Easy operation
Operation is extremely easy. You can make all configurations comfortably from the controller using VarioGard software. You can configure and monitor four current limit values and four averages over time for each transmitter. The alarms are optically and acoustically displayed on the transmitter and transmitted to the controller. A three-colour LED indicates the operating status of the transmitter. The calibration is controlled using a magnetic wand via contact points.

Individually configurable
The VarioGard 3300 IR is adaptable to your needs. This means that you have different gas libraries available depending upon the desired use. It detects LPG for garages and CH4 for methane monitoring that does not require explosion protection. In addition, you can place the cable inlets on all four sides of the transmitter. The transmitter can be mounted vertically as well as horizontally.

Download

Produk Lainnya

Drager Bodyguard® 1000

Designed to protect life by alerting the team when a wearer becomes motionless or distressed, the Dräger Bodyguard® 1000 emits clear and distinctive signals and alarms to ensure quick and effective recognition, even in the worst environmental conditions.

Tuffsafe Mechanical Hazard Gloves, Black/Red, Nylon Liner, Nitrile Coating, EN388: 2003, 4, 1, 2, 1, Size 7

Protect the hands when handling greasy and oily components with Red Cut 1 safety gloves from Tuffsafe®. Colour-coded to indicate their medium protection level (level 1), these lightweight, breathable gloves offer excellent grip thanks to the nitrile foam palm coating.

Features and Benefits
• Seamless design to avoid skin irritation during prolonged use
• Knitted elasticated cuff for a secure fit
• Flexible to maintain dexterity

Standards
• CAT II
• EN388 4.1.2.1.

Warnings
• Not suitable for use in areas with a cut risk

Notes
• 13 gauge

ISC MX6 iBrid® Six-Gas Monitor

Take your gas detection capabilities to new heights with the MX6 iBrid®. With the ability to monitor up to six gases at once, 24 sensor options, and a robust list of configurable settings, the MX6 iBrid easily adapts to your safety needs.

Drager PointGard 2200

The Dräger PointGard 2200 is a self-contained gas detection system for the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Drager VarioGard® 3300 IR Transmitter

Informasi Pemesanan