Drager Sensor® IR

Upgrade from Catalytic bead to infrared technology with ease using the DrägerSensor IR. The Sensor IR can replace catalytic ex-sensors (pellistors) from the majority of manufacturers without replacing controllers, cables, junction boxes or control systems.

Problem-free integration
With its Wheatstone bridge emulation, the Sensor IR outputs a mV signal, the same as the pellistor it replaces. The result is the control system sees the same signal input as before the Sensor IR was installed.
Naturally the Sensor IR can be operated with all Dräger control systems, more importantly it can also be connected to almost all installed systems from other manufacturers, without having to modify the wiring.

Smart and flexible
The Sensor IR offers a gas library with three gas categories: methane, propane and ethylene. Therefore, nearly all hydrocarbons are detectable. Temperature-compensatory linearising algorithms allow signal outputs for individual substances.
Through optional accessories – e.g. the process adapter or the duct mount set – a multitude of measuring tasks can be performed professionally.

Immune to pellistor poisons
Technological advantages in infrared technology (e.g. fail-safe operation or immunity against pellistor poisons) have been recognised and valued by gas detection users for a long time.
The Sensor IR now also offers these plus points for systems that have already been installed. Its long life time of over 15 years and long maintenance intervals mean that maintenance costs are significantly lower than for pellistors, make it a cost-effective, premium solution.

Performance
Temperature-compensatory and non-imaging optics
Gas library with 3 gas categories: Methane, propane and ethylene (typical of most hydrocarbons), performance approved in accordance with IEC 60079
Performance approval (in accordance with IEC 60079) for 13 further substances
Dirt and dust protection through hydrophobic splash guard
mV signal for Wheatstone bridge installations
Specified temperature range from - 40 °C to + 65 °C / - 40 °F to + 149 °F
Unrestricted usage in humid atmospheres
Hermetically sealed enclosure made of 316 stainless steel
Slim enclosure design for confined areas of use
Long maintenance interval thanks to minimum long-term drift
No moving parts
Typical life time: 15 years
Ex approvals for worldwide use: ATEX, IECEx, UL, CSA
Dust ex approval for zone 21 and 22
Ingress Protection: IP 65, IP 66 and IP 67

Download

Produk Lainnya

Drager X-am® 5000

The Dräger X-am® 5000 belongs to a generation of gas detectors, developed especially for personal monitoring applications. This 1- to 5-gas detector reliably measures combustible gases and vapors as well as oxygen and harmful concentrations of toxic gases, organic vapors, Odorant and Amine.

Drager Flame 1500 (IR3)

The Dräger Flame 1500 flame detector uses its triple IR sensor to detect hydrocarbon fires even at great distances. It offers you high reliability against false alarms.

Milwaukee High Performance Safety Glasses with Gasket

48-73-2040A
• Removable Gasket Protects Against Debris
• Military Grade Impact Protection
• Lasting Fog-Free Lenses

Tuffsafe Cut Resistant Gloves, Grey/Black, Nitrile Palm, HPPE Liner, EN388: 2016, 4, X, 4, 2, D, Size 9

These nitrile coated gloves are ideal for use in high risk areas. Possessing a nitrile coated palm, a 13 gauge HPPE liner, additional support in the thumb crotch area and an elasticated cuff, the gloves are available to purchase in a range of sizes. Finished in a grey colour with a black palm,

Features and Benefits
• The nitrile palm coating provides excellent grip when handling oily or greasy components
• Additional thumb crotch support provides extra protection in high wear areas
• Available in a variety of sizes to suit your needs
• Elasticated cuff provides a snug fit whilst ensuring dexterity

Typical Applications
• High risk applications
• Oil industry

Standards
• EN420:2003+A1:2009
• EN 388:2016 4.X.4.2.D.
• Dexterity level: 5

Drager Sensor® IR

Informasi Pemesanan