Drager PointGard 2720

The Dräger PointGard 2720 is a self-contained gas detection system for the continuous area monitoring of carbon dioxide (CO2) in ambient air. PointGard 2720’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and is compatible with a remotely mounted Dräger PIR 7200 infrared CO2 sensor.

Uses the Dräger PIR 7200 high performance infrared CO2 sensor
With its stainless steel 316L enclosure and drift free optics, the Dräger PIR 7200 is designed for the harshest industrial and commercial outdoor environments. The unique 4 beam signal stabilizing system makes the sensor resistant to dust or dirt deposits on the optical surfaces. Environmental and ageing effects are largely compensated ensuring long term, drift free operation. The measuring range can be freely adjusted between 0 – 2,000 ppm and 0 – 30% volume enabling a wide variety of applications.

Waterproof stainless steel IR sensor
Thanks to its innovative splash guard and waterproof enclosure, the PIR 7200 sensor is ready for extreme conditions such as areas with daily high-pressure wash-downs and extreme temperature and humidity levels. It is available with an integrated Ex e junction box or an aluminum or 316L stainless steel junction box.

Uses the Dräger PIR 7200 high performance infrared CO2 sensor
With its stainless steel 316L enclosure and drift free optics, the Dräger PIR 7200 is designed for the harshest industrial and commercial outdoor environments. The unique 4 beam signal stabilizing system makes the sensor resistant to dust or dirt deposits on the optical surfaces. Environmental and ageing effects are largely compensated ensuring long term, drift free operation. The measuring range can be freely adjusted between 0 – 2,000 ppm and 0 – 30% volume enabling a wide variety of applications.

Flexible communications
PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal with HART output allows integration into a larger gas detection system.

Waterproof stainless steel IR sensor
Thanks to its innovative splash guard and waterproof enclosure, the PIR 7200 sensor is ready for extreme conditions such as areas with daily high-pressure wash-downs and extreme temperature and humidity levels. It is available with an integrated Ex e junction box or an aluminum or 316L stainless steel junction box.

Rugged and compact housing
PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it to easily fit most applications. Built-in cable glands make it easy to install.

Flexible communications
PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal with HART output allows integration into a larger gas detection system.

Advanced display with diagnostics
The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to interpret. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Rugged and compact housing
PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it to easily fit most applications. Built-in cable glands make it easy to install.

Monitor remote areas up to 30 meters away
The Dräger PIR 7200 sensor is designed to be installed in Zone 1 classified hazardous areas remotely from the PointGard 2720 with a four-conductor shielded cable up to 30 meters long. The cable and Dräger PIR 7200 sensor must be ordered separately from the PointGard 2720.

Advanced display with diagnostics
The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to interpret. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Monitor remote areas up to 30 meters away
The Dräger PIR 7200 sensor is designed to be installed in Zone 1 classified hazardous areas remotely from the PointGard 2720 with a four-conductor shielded cable up to 30 meters long. The cable and Dräger PIR 7200 sensor must be ordered separately from the PointGard 2720.

Download

Produk Lainnya

Drager X-plore® 6570

The Dräger X-plore® 6570 is the high comfort full face mask used by professionals in a wide variety of applications. It is the successor to the Panorama Nova® RA masks, a range which has proven itself over decades of use worldwide. Its robust but flexible and skin-friendly mask body made from silicone features high wearing comfort – even when used for long periods of time.

Drager SPC 4700 with CVA 0700

Comfort and mobility, along with optimal protection: that's what you get when you combine the Dräger SPC 4700 liquid-tight protective suit with the CVA 0700 ventilation vest. This type 3 suit reliably protects against chemicals while the vest provides a continuous supply of breathing air and a pleasant, cooling airflow.

Drager VarioGard® 2320 IR

In many fields of work, quick and reliable gas detection is a must. This is why we offer the Dräger VarioGard® stationary gas detector range. Dräger VarioGard® 2320 IR monitors possible gas leaks or work place exposure limits of carbon dioxide.

Drager X-plore® 5500

Whether in the chemical, metal, or automotive industries, ship building, supplies, or disposal: The Dräger X-plore® 5500 full face mask is the right solution for environments where not only increased respiratory protection is required, but also a clear vision is mandatory.

Drager PointGard 2720

Informasi Pemesanan