Drager Flame 5000

The Dräger Flame 5000 is an imaging based explosion proof flame detector. This visual flame detection system uses digital image processing and advanced algorithms to process and interpret flame characteristics. This principle offers an extended field of view and fewer false alarms. Each detector is equipped with a colour CCTV camera.

Immunity against false alarms
The unique software algorithm of the Dräger Flame 5000 is capable of discriminating between genuine fire conditions and other radiant sources that may cause conventional detectors to become desensitized or produce unwanted alarms. The detector is immune to common sources of unwanted alarms such as welding work, hot CO2 emissions and flare reflections. This makes it to a great partner on your oil rig or industry plant.

Maximum field of view
The Dräger Flame 5000 can detect n-heptane fires of 0.1 m2 (1 ft²) or greater at a distance of 44 m (144 ft) within a 90° horizontal and 65° vertical field of view. The detector’s field of view is a rectangular pyramid shape. This gives it one of the greatest standard coverage area and range of any flame detector currently available.

Flexible operation
The Dräger Flame 5000 operates as a stand-alone unit to transmit live video recordings or can be connected to a control system or a fire panel to provide fault and fire signalling. This is achieved using a 0 to 20 mA signal or relay outputs. An integrated memory card enables the detector to record videos before and after alarm events.

Depending on the environmental conditions you can choose between an aluminium or a stainless steel housing.

Safe and fast intervention
Live video provides instant visual verification of a fire alarm without the operator having to enter a dangerous area. This reduces the risk of injury and improves response time.

An optical verification facility checks the window for contamination and ensures its field of view is not compromised by obstructions placed immediately in front of the detector.

Functional test
The Dräger FS-5000 flame simulator tests Dräger Flame Detectors at distances up to eight metres (22 ft). With reduced need for scaffold or ladders to access the detector, maintenance costs can be decreased.

Easy to install and use
The detector is very easy to install using a mounting bracket of stainless steel. The swiveling mounting bracket ensures that the device is optimally aimed towards potential sources of fire. The device status is displayed to nearby workers by tri-coloured LED light.

Download

Produk Lainnya

Drager Polytron® 5700 IR

The Dräger Polytron® 5700 IR is a cost effective explosion-proof transmitter for the detection of flammable gases in the lower explosive limit (LEL). It uses a high performance infrared Dräger PIR 7000 sensor that will quickly detect most common hydrocarbon gases. A 3-wire 4 to 20-mA analogue output with relays makes it compatible with most control systems.

Drager Polytron 2000

Robust, precise, safe – the Dräger Polytron 2000 is a stationary gas detector for measuring standard gases (O2, H2S, NH3, Cl2, CO). With the new, pre-calibrated DrägerSensor MEC and robust design, this gas transmitter is a reliable and economic solution for non-explosion proof areas.

Drager SPC 4400 / SPC 4800 / SPC 4900

Light and comfortable to wear: Dräger SPC 4X00 liquid-tight splash suits offer reliable protection against the finest particles and powders, many concentrated inorganic acids and alkaline solutions, and are also resistant to a wide variety of organic liquid chemicals. They are CE-certified and classified as type 3, 4, 5 and 6.

Drager PARAT® 3160

The Dräger PARAT® 3160 is a half mask escape device equipped with a multi-gas ABEK15 filter. Approved to the only recognized standard for filtering industrial escape devices (DIN 58647-7), it provides users a minimum of 15 minutes escape time. Compared to PARAT® 3100, the half mask and filter are vacuum sealed in an aluminum barrier bag, making it better suited for diverse climate zoness.

Drager Flame 5000

Informasi Pemesanan