Drager Flame 1750 H₂ (IR3)

With its triple IR sensor, the Dräger Flame 1750 H2 detects hydrogen-based fires. It offers you high reliability against false alarms and its good measurement performance remains even at extreme temperatures.

Fast and safe detection
The Dräger Flame 1750 H2 is a triple IR flame detector. It detects hydrogen-based fires even at a greater distance. In just five seconds, it notifies you of a hydrogen fire (1-metre flame) at a distance of up to 40 metres. Due to its certified reliability, the Flame 1750 H2 meets the IEC 61508 requirements for safety integrity according to SIL 2.

The flame detector also has HART® and RS-485 interfaces and has low energy consumption.

Developed for hydrogen
The Dräger Flame 1750 H2 was specially developed for the detection of hydrogen fires. Its three IR sensors measure only in the 2 to 4 μm range relevant to hydrogen flames, guaranteeing high performance and a low false alarm rate. Common sources of false alarms, such as hot CO2 or welding work, are no longer a problem for you.

Robust and durable
The housing is very robust and weatherproof. To protect against icing and fogging, the window can be heated automatically. This allows you to operate the Flame 1750 H2 reliably even under extreme environmental conditions, e.g. in temperatures from -60 °C to +85 °C.

Simple verification
The built-in self-test "Advanced Optical Verification" (AOV) automatically checks the electronics and optics of the Flame 1750 H2. The three-colour LED on the front allows you to quickly see the device status. Green stands for normal operation, yellow indicates an error and red signals a fire alarm.

Download

Produk Lainnya

Drager Pac® 6500

The robust Dräger Pac® 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H2S, SO2 or O2 quickly and precisely. Measured data can easily be transmitted into the Dräger Gas Detection Connect system via Bluetooth®. Quick sensor response times and a powerful battery also ensure safety.

Drager PARAT® 1260

Designed with simplicity in mind, the Dräger PARAT® 1260 is an extra small mouthpiece / nose clip filtering escape device equipped with a multi-gas ABEK filter that offers you 10 minutes of protection against a variety of toxic industrial gases and vapours. The device and filter are vacuum sealed in an aluminum barrier bag, making it better suited for diverse climate zones.

Drager X-plore® 5500

Whether in the chemical, metal, or automotive industries, ship building, supplies, or disposal: The Dräger X-plore® 5500 full face mask is the right solution for environments where not only increased respiratory protection is required, but also a clear vision is mandatory.

Tuffsafe Cut Resistant Gloves, Grey/Black, Nitrile Palm, HPPE Liner, EN388: 2016, 4, X, 4, 2, D, Size 9

These nitrile coated gloves are ideal for use in high risk areas. Possessing a nitrile coated palm, a 13 gauge HPPE liner, additional support in the thumb crotch area and an elasticated cuff, the gloves are available to purchase in a range of sizes. Finished in a grey colour with a black palm,

Features and Benefits
• The nitrile palm coating provides excellent grip when handling oily or greasy components
• Additional thumb crotch support provides extra protection in high wear areas
• Available in a variety of sizes to suit your needs
• Elasticated cuff provides a snug fit whilst ensuring dexterity

Typical Applications
• High risk applications
• Oil industry

Standards
• EN420:2003+A1:2009
• EN 388:2016 4.X.4.2.D.
• Dexterity level: 5

Drager Flame 1750 H₂ (IR3)

Informasi Pemesanan