One of the many benefits of the FPS® 7000 Facemask is the option of fitting a head up display. Always within the field of view the head up display allows easy monitoring of the cylinder contents without any manual action by the wearer.
Easy to fit and remove The display fits easily into the FPS 7000 facemask, and can be quickly fitted without the need for tools, saving time during maintenance. In an emergency you can transfer the HUD between facemasks in a matter of seconds.
Well Protected The HUD is well protected in the facemask and can not be damaged by heat, shocks, humidity or chemicals.
Long battery life Providing on average 360 hours of use and easily changed without the need for tools.
Wireless operation The transmitter unit wirelessly transfers data to the facemask, avoiding time consuming connection of cables, reducing costs and connection errors.
Easy to read LED's Red, amber and green LEDs provide precise information about your cylinders air pressure at all times. The display automatically adapts to ambient brightness enabling clear indication of pressure information , even under poor lighting conditions.
Additional low air pressure warning In addition to the SCBA's primary low pressure alarm a red LED on the HUD flashes if the cylinder pressure reaches the low pressure warning threshold. This provides the wearer with an additional warning.
- Continuous detection of VOC gas in explosion hazardous area with flame proof structure - Self diagnosis function with built-in Microprocessor - Low concentration VOC gas detection by PID sensor - Stable quality and proved detection principle for service life - Multi functions and high quality with low cost of ownership - Built-in back light LCD or OLED display - Easy Configuration of monitoring by HART communication - Auto calibration and program setting with a magnet bar - 4-20mA (Current source or Sink) output signal - With the alarm unit - Normal : Green LED - Alarm : Red LED, Buzzer(95 dB) - Trouble : Yellow LED - 3-wire connection for signal & power - Calibration and maintenance by one-man
The Dräger Polytron® SE Ex ... DQ sensing heads are gas detectors for the continuous monitoring of flammable gases and vapours in the ambient air. Measurement is based on the heat of reaction principle where a chemical reaction takes place in a catalytic bead (also known as a pellistor) inside the sensor.
Protect your Kennedy welding helmet with a lens cover and keep sparks and splatter from damaging the LCD cartridge unit.
Features and Benefits • An economic choice that prolongs the life of expensive equipment • Quick and easy to change over • Both inner and outer lens covers are available