Drager Bodyguard® 1000

Designed to protect life by alerting the team when a wearer becomes motionless or distressed, the Dräger Bodyguard® 1000 emits clear and distinctive signals and alarms to ensure quick and effective recognition, even in the worst environmental conditions.

Tough, rugged design
Rugged design for use under the most demanding of operational conditions, the Dräger Bodyguard 1000 will perform in temperatures ranging from -30 °C up to 60 °C, no matter how extreme the environment is.

Simple to use and easy maintenance
Bodyguard 1000 is free of periodic maintenance, with only battery replacement to plan, as and when required. With the same easy to use functionality as its big brother Bodyguard 7000, the Bodyguard 1000 features straight forward push button functionality to ensure simple operation, even whilst wearing gloves. The unit will perform an automatic full “self check” upon start up. Accidental switch off during use is eliminated by the options of tally insertion or two-button push, depending on the operating mode.

Compatible with all SCBA
With optional alligator clip or securing clamp, the Bodyguard 1000 can be quickly and securely fitted to any SCBA, in any position, whether at the shoulder, waist or backplate.

New high profile audible and visual alarms
After a nominal 25 seconds without motion and a further 8 seconds without cancellation, the Bodyguard 1000 will emit a directional full alarm to assist the fast location of a wearer in distress. Motion sensor timings can be configured according to preference by means of the RFID PC Link Module and a PC. In addition the high visibility twin fascia LED's enable location in conditions of poor visibility. Continuous low frequency flashing blue lights allow easy location of team members during normal activities, and allow team members to remain visible to one another.

Data log of incident history
As with Bodyguard 7000, the Bodyguard 1000 comes with full data log functionality allowing the downloading of incident history using Drägers RFID PC Link Module and our Windows based Software Package.

Choice of operating modes
The device comes in a choice of operating modes, with either button operation or tally key operation for entry control applications.

Temperature control during operation
Dräger Bodyguard 1000 is equipped with a thermal alarm which sounds when the ambient temperature rises rapidly or exceeds safe working levels, making it unsafe for the user to remain in that environment.

Download

Produk Lainnya

Milwaukee High Performance Safety Glasses with Gasket

48-73-2040A
• Removable Gasket Protects Against Debris
• Military Grade Impact Protection
• Lasting Fog-Free Lenses

Summitech RL 10 GB

PRODUCT CODE : RL 10 GB
COATING MATERIAL : Foam
LINEAR MATERIAL : Foam Natural Rubber Palm Coated Gloves
EXTERIOR FINISHING : 13G Nylon
CUFF STYLE : Extended sleeve with elastic edge
THICKNESS MM : N/A
LENGTH MM : 220-260mm ± 10mm
COLOUR : Teel Green & Red
SIZE/WRIST : 6, 7, 8, 9, 10
PACKAGING : Bulk packed 12 pairs in a bundle 120 pairs in a master carton

Halo Safety Helmet With 6 Point Harness, White, ABS, Vented, Reduced Peak, Includes Side Slots

These C6 ABS 6 Point Harness Helmets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

The Halo® range of short peak side vented safety helmets have been designed with comfort and performance in mind. Available in a range of colours, each safety helmet is manufactured from ABS plastic with a 6-point textile suspension harness and fleece sweatband.

Both practical and stylish, these helmets are designed to protect personnel whilst on site. Each helmet also includes a rain gutter and slots for hearing or eye protection accessories.

Features and Benefits
• 6-point textile suspension harness for comfortable wear
• Washable fleece sweatband keeps sweat out of the eyes and off the face
• Manufactured from ABS plastic for resilience and product longevity
• 12 ventilation holes maintain airflow and wearer comfort
• Ratchet adjustable headband for easy fitting
• 4-point self-releasing chin strap mounts for optionally secured fitting
• Slots (30mm) for hearing or eye protection accessories
• Rain gutter prevents the collection and draining of water onto the wearer
• German manufactured for a lower carbon footprint
• Available in a range of colours to suit your needs

Standards
• Halo® products are BSI tested
• EN 397:2012 + A1:2012

Drager SPC 4700 with CVA 0700

Comfort and mobility, along with optimal protection: that's what you get when you combine the Dräger SPC 4700 liquid-tight protective suit with the CVA 0700 ventilation vest. This type 3 suit reliably protects against chemicals while the vest provides a continuous supply of breathing air and a pleasant, cooling airflow.

Drager Bodyguard® 1000

Informasi Pemesanan