Pump & Lubricants
Moresco Die Casting Lubricants
Die Realasing Fluids | GRAPHACE
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Download
Produk Lainnya
Discflo offers two lines of sanitary pumps, the SP Series and MIS Series. Both series meet 3-A sanitary and international hygiene standards and USDA requirements.
They can be supplied in Clean-in-Place or Steam-in-Place versions, and in a variety of metallurgy to meet the user’s requirements.
They can be supplied in Clean-in-Place or Steam-in-Place versions, and in a variety of metallurgy to meet the user’s requirements.
Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
This 1/8" BSP threaded, 4 jaw hydraulic connector is an effective way of allowing for the controlled flow of lubricants. Securely fastens the grease nipple when in use to ensure minimal slippage.
Features and Benefits
• Manufactured from steel for durability
• Securely grips the grease nipple while in use to control the flow of the lubricant
• Textured in places for easy gripping even with oily or greasy hands
Typical Applications
• Automotive
• Engineering
• Mechanics
Features and Benefits
• Manufactured from steel for durability
• Securely grips the grease nipple while in use to control the flow of the lubricant
• Textured in places for easy gripping even with oily or greasy hands
Typical Applications
• Automotive
• Engineering
• Mechanics
For use with Kennedy grease guns and all other hydraulic grease equipment.