Air Circuit Breaker (ACB) is one type of electrical protection device commonly used in electrical systems. Air Circuit Breaker is an electrical protection device used to cut off the flow of electricity in an electrical circuit when there is a disturbance or excess current. This tool is generally used in industrial electrical panels and can be used in electrical systems with quite high voltage.

Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.

The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.

M12 SAL-0
• Light head rotates 210° and pivots 270° for light in any direction
• Collapses down to 78cm with three side handles for easy transportation and storage
• Sets up in 5 seconds, Three height positions; 90cm, 127cm & 173cm

M18 ONERSAL-0
• 5400 Lumens of high quality light, Over a day of runtime
• Waterproof: Fully submersible up to a meter
• 5400 lumens up to 26 hours of runtime

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NNP19940031
Type of Light Source : LED
Power Input : 120W
System Lumen Output : 15600 lm
Power Voltage : 110-240V
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 60deg.
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -40 - 50°C
Dimensions : 304mmx310mmx296mm
Body : ADC