Produk

The Dräger Polytron® 5310 IR is a cost effective explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses an infrared DrägerSensor® IR that can be configured for methane, propane, or ethylene. A 3-wire 4 to 20-mA analogue output with relays makes it compatible with most control systems.

Fluke 750P31 Offers



Fluke 750P Series Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. When used with the 750 Series Documenting Process Calibrators, pressure readings can be date/time stamped and stored electronically for later retrieval. This saves time, eliminates errors, and supports F85compliance with quality standards and regulations.



Features

- Parameter/Range:0 to 10000 psi (0 to 700 bar)

- Burst Rating6:2x

- Hi Side Media2:316 SS

- Lo Side Media2:N/A

- Reference Uncertainty4:± 0.0175%

- Total Uncertainty 1-year (15-35°C):± 0.035%

- Total Uncertainty 1-year1:± 0.045%

- Total Uncertainty 6-month (15-35°C):± 0.03%

- Total Uncertainty 6-month1:± 0.04%

The Equal Tees ensure quick and simple tube insertion whilst also boasting a compact lightweight design with a well proven tube retaining system. The tapered threads have a re-usable thread seal and parallel threads have a rubber washer. The main body is manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Available in a variety of sizes to suit your needs.





Features and Benefits


• Suited for use with nylon and polyurethane tubing for versatility of use


• Available in a range of sizes to suit your needs


• Quick and easy tube insertion with a solid seal


• Lightweight design due to the acetal construction, stainless steel retaining ring and nitrile tube seal and acetal resin tube release collar





Typical Applications


• Engineering


• Plumbing


• Garages

Ideal for off-hand grinding and deburring, the 'W' shape mounted points from Kennedy® make excellent work of medium and heavy stock. The aluminium oxide abrasive is a naturally sourced abrasive that produces less dust while effectively removing stock as required.

Features and Benefits
• All points are aluminium oxide with rubenite™ as standard - perfect for all general-purpose grinding and deburring on steels and most metals
• Designed for reliability
• Non-toxic abrasive

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
• Compatible with the Kobe® FDG180m Straight Die Grinder

A set of three Sherwood HSS Taps ideal for the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.

Features and Benefits
• Manufactured from durable high speed steel
• Precision ground flutes for accurate thread cutting
• Features class 2 thread forms with medium fit tolerance
• Manufactured with a bright finish

Typical Applications
• Tapping
• Steel
• Brass
• Aluminium
• Engineering
• Manufacturing

Standards
• Tap dimensions to ISO529
• Thread Forms are Class 2 medium fit tolerance
• Straight Flute Individual Sizes IS0 529

Notes
• Available in sizes 1.0 x 0.25mm - 48 x 5.00mm
• Set of 3 - 1 Taper, second and plug

This 51 piece set contains both metric and AF sized sockets, standard and deep for versatility of use. Each piece is manufactured from chrome vanadium steel with a mirror finish and aluminium free construction and has a hexagon 6 point design. Supplied in a plastic carry case.

Features and Benefits
• Manufactured from chrome vanadium steel for durability
• 51 piece set is highly comprehensive for scope of use
• Mirror finish and aluminium free construction repels dirt and makes the product suited for non-sparking applications
• Supplied in a moulded plastic storage case for organisation of your components

Contents
• Standard Sockets (Metric): 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
• Deep Sockets (Metric): 6, 7, 8, 9, 10, 11, 12, 13, 14mm
• Standard Sockets (AF): 3/16in., 7/32in., 1/4in., 9/32in., 5/16in., 11/32in., 3/8in., 7/16in., 1/2in., 9/16in.
• Deep Sockets (AF): 3/16in., 7/32in., 1/4in., 9/32in., 5/16in., 11/32in., 3/8in., 7/16in., 1/2in., 9/16in.
• Accessories: ratchet handle (rubber grip), 100mm sliding T-handle, 100 and 250mm extension bars, 50 and 150mm wobble extensions, universal joint, spinner handle, 150mm flexible extension, swivel handle rubber grip

Typical Applications
• Automotive
• Construction
• Engineering

In many fields of work, quick and reliable gas detection is a must. This is why we offer the Dräger VarioGard stationary gas detector range. These gas-warning devices can be deployed to monitor possible gas leaks or work place exposure limits.

Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

Applications:
• Final finishing of metal surfaces.
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels.
• Edge blending and cleaning. Surface preparation prior to painting and plating.
• Can be used on metal, wood, plastic and fibreglass.

IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION

Portable multi-function calibrator simplifies calibration work



Whether you're calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does many different tasks quickly and it's the only process calibrator you need to carry. This rugged, reliable, integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART smart transmitters and other instrumentation.



Measurement and source capabilities:

- AC/DC voltage

- mA loop w/ 24V loop power

- Pressure

- Thermocouples & RTDs

- Frequency

- Resistance



Enhanced process calibrator operation



With the bright white dual display, you’ll be able to read both sourced and measured parameters simultaneously. The rechargeable Li-Ion battery offers up to 10 hours uninterrupted usage allowing you to complete one task after another without needing to stop, and also includes direct AC power capabilities if needed. Finally, communicate with HART smart digital transmitters directly through the mA measurement jacks for seamless calibration with fewer connections.



Do more, with less

The 754 does the work of several tools. It sources, simulates and measures pressure, temperature, and electrical signals with one rugged, hand-held device. The powerful built-in HART interface can perform nearly all day-to-day tasks you now perform with a separate digital communicator. It can handle fast-pulsed RTD transmitters and PLCs, with pulses as short as 1 ms. The 754 also measures/sources pressure using any of the Fluke 750P Series Pressure Modules as a reference and boasts many additional features like:

- Custom auto-step and ramping

- Custom units

- User-entered values during test

- One-point and two-point switch testing

- Square root DP flow testing

- Programmable measurement delay



Download procedures, lists, and instructions



The 754 is a power multifunction documenting calibrator that you can use to download procedures, lists, and instructions created with software, or upload data for printing, archiving, and analysis. The tool can hold up to a full week of downloaded procedures and calibration results and offers compatibility with many asset management software. Users can also create and run automated as-found or as-left procedures to satisfy quality programs or regulations, and records and documents results.



For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA, and OSHA regulations. Plus, the graphical screen, Li-Ion battery for longer life, USB port, and accessories help you work smarter and faster.



To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software.

The Equal Tees ensure quick and simple tube insertion whilst also boasting a compact lightweight design with a well proven tube retaining system. The tapered threads have a re-usable thread seal and parallel threads have a rubber washer. The main body is manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Available in a variety of sizes to suit your needs.





Features and Benefits


• Suited for use with nylon and polyurethane tubing for versatility of use


• Available in a range of sizes to suit your needs


• Quick and easy tube insertion with a solid seal


• Lightweight design due to the acetal construction, stainless steel retaining ring and nitrile tube seal and acetal resin tube release collar





Typical Applications


• Engineering


• Plumbing


• Garages

Supplied in a compact carry case with slots for each item, this 19 piece socket set is the ideal way to ensure you are always prepared no matter the task at hand. Manufactured from high quality steel and finished with a chrome plating, each socket has a unique knurled design.

Features and Benefits
• Knurled design sockets enable enhanced grip
• Chrome plated with a mirror finish for bolstered protection from wear and tear and making the product easier to clean
• Manufactured from steel, making it a robust product and aluminium free
• 19 piece set ensures you will always have the correct size socket to hand

Contents
• Metric Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
• Accessories: ratchet handle, spinner handle, sliding T-handle, flexi-drive 145mm, universal joint, extension bar 100mm

Typical Applications
• Ideal for use by professionals such as plumbers, electricians, engineers, mechanics and DIY enthusiasts alike

Standards
• ANSI B107.5M: 1987
• ANSI B107.1: 1978 and BS 4006: 1992ANSI B107.10M : 1982
• BS 4006 : 1992

DCMT Turning Inserts

55° Rhombic Insert

Insert Grades QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PM. Application: Med Cut.