Produk

Fluke 62 Max Infrared Thermometer delivers single-laser targeting accuracy



The Fluke 62 MAX Infrared thermometer delivers many of the features of the Fluke 62 MAX+, but features a single laser and 10:1 distance to spot ratio. You can use the Fluke 62 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents. It is small in size and extremely easy to use. The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures in hard to reach areas. With its IP54 rating for dust and water resistance you can rely the Fluke 62 MAX to deliver accurate, repeatable temperature measurements, rain or shine, in even the dirtiest and dustiest industrial sites. And it’s rugged enough to take a 3-meter drop so no worries even if you work from a ladder.



Other useful features:

- High and low alarms for rapid detection of temperatures outside the limits

- Powered by a single, standard AA battery.

- Comes with a three-year warranty -30-

- Withstands a 3 m (9.8 ft.) drop

- Offers small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box

- Features a large, backlit display to make data easier to read, even in dark areas.

- Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements

Fluke 700G31 Offers



Compatible with most hydraulic and pneumatic test pumps, users can also make use of Fluke's 700G/TRACK Software to upload over 8000 pressure measurements logged in the field.



Features

- Precision pressure measurement from ±10 inH2O to 10,000 psi (20 to 690 bar)

- Absolute pressure measurement ranges 15, 30, 100, 300 psia

- Accuracy to 0.05% of full scale

- Reference class gauge accuracies to 0.04% of reading

- Easy to use, rugged construction for reliable performance

- CSA; Class 1, Div 2, Groups A-D rating

- ATEX rating: II 3 G Ex nA IIB T6

- Combine with the 700PTPK or 700HTPK pump kits for a complete pressure testing solution for up to 600 psi (40 bar) with the PTP-1 pneumatic pump and up to - - 10,000 psi (690 bar) with the HTP-2 hydraulic pump

- Log up to 8493 pressure measurements to memory (requires 700G/TRACK software)

Reducing Triple Branch Manifolds


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

'B' Shape - Shank Diameter 3mm

Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard for all general-purpose grinding and deburring on steels and most metals
• Durable and reliable constrution

Typical Applications
• Suitable for portable die and straight hand grinders

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only

The Dräger PEX 1000 is a converter module that converts the mV signals of the Dräger Polytron® SE Ex sensing heads into mA signals and sends them to a control unit like the Dräger REGARD® family. Together with the Dräger Polytron® SE Ex, the PEX 1000 fulfils the conditions set down for primary explosion protection.

APXT(APKT) 85° parallelogram milling inserts feature a PVD coated substrate ideal for milling steel and stainless steel.

Features and Benefits
• PVD coating for improved heat and wear resistance
• (P10-P35) grade ideal for milling steels and some stainless steels

Typical Applications
• Milling
• Steel
• Stainless steel

Standards
• Insert Grade QP30P
(P10-P35)

Handle needle files are designed for filing, finishing and polishing soft and hard metals.

Features and Benefits
• Available in a range of cut types to suit a variety of jobs
• Round, knurled metal handle

Notes
• Available in 140mm and 160mm lengths and a complete range of shapes.

Standards Met
• Manufactured to BS 498:1990

Second Cut Needle File Set.

Features and Benefits
• Supplied in PVC Wallet
• Use for fine filing, polishing and finishing jobs
• For soft and hard metals
• Non-slip grip handle

Standards Met
• Manufactured to BS 498:1990

Contents (1 of each)
• Flat, Hand, Half Round, Round, Square, Three Square.

Fastest one-handed handheld tool for loop inspection



The Fluke 707 title="Loop Calibrator">Loop Calibrator is a high performance solution for calibrating, repairing, and maintaining current loops. The new "Quick Click" knob makes the tool extremely fast and easy to operate. The device features:

- One-handed user interface with "Quick Click" hold knob

- Source finding, simulation, and mA measurement

- 0.015% accuracy and 0.001 mA resolution

- Simultaneous display of mA and % of range

- Selectable stages or ramp results

- 24 V loop supply with mA measurement, including 250O HART resistor

- 0-28 VDC measurement to check Loop Voltage

- Easy battery replacement without opening the box

- Simple box with separate protective case

- Three year warranty

In-line Reducer


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

The Dräger PIR 7000 is an explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours. With its stainless steel SS 316L enclosure and drift-free optics this detector is built for the harshest industrial environments, e.g. offshore installations.

HSS Round Inch.
Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom).