Produk

The 87V MAX contains all the trusted features of the most popular DMM in use today, the Fluke 87V, with many more extras.



Withstands drops of up to 4 meters (13 feet)

Fluke's most rugged digital multimeter. The 87V MAX features a rugged case for industrial use and a removable holster. This holster also doubles as a test probe holder for one-handed operation.



IP67 rated

Completely waterproof and dustproof, to work reliably anywhere you need to work.



Heat and cold resistant

This meter has a longer operating temperature range from -40 °C (for up to 20 minutes) to +55 °C.



Another product highlight

- True-rms ac current and voltage for accurate measurements on non-linear signals

- Measures up to 1000 V ac and dc

- Measures up to 10 A (20 A for 30 seconds)

- Frequency up to 200 kHz

- Built-in thermometer allows you to freely take temperature readings without having to carry a separate instrument

- Min/Max/Average recording, plus 250 µs Peak min-max to record variations automatically

- Unique function for accurate measurement of voltage and frequency in variable frequency motor drives and other electrically noisy equipment

- Large digit display, 2 brightness levels, white backlight, and backlit keypad keys for better visibility

- High resolution 19,999 digit mode display

- Long lasting battery life (800 hours)

This 25 piece metric socket set contains various chrome vanadium steel sockets and accessories. All sockets are metric sized and feature a double knurl design, side drive, a 12 point bi-hexagonal stature and are fully chrome plated with a mirror finish. The set is supplied in a robust plastic case with a carrying handle for transportation.

Features and Benefits
• Sockets possess a unique double knurl design for high grip of fasteners
• The sockets are manufactured specially to ensure that they will not round off
• Side drive allows for high torque
• Sockets can grip even worn nuts
• All sockets and tools are aluminium free
• Chrome vanadium steel construction with a fully chrome plated mirror finish for durability and product longevity
• Supplied in a fitted case with cushioned handle, snap-shut clasps and padlock hole (padlock sold separately)

Contents
• Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30, 32mm
• Spark Plug Sockets: M10 and M14
• Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars. Robust fitted case with security padlock hole and cushion grip handle

Typical Applications
• Construction
• Engineering
• DIY
• Automotive

Standards
• ANSI B107.5M: 1987
• ANSI B107.1: 1978 & BS 4006: 1992
• ANSI B107.10M : 1982
• BS 4006 : 1992

Air Circuit Breaker (ACB) is one type of electrical protection device commonly used in electrical systems. Air Circuit Breaker is an electrical protection device used to cut off the flow of electricity in an electrical circuit when there is a disturbance or excess current. This tool is generally used in industrial electrical panels and can be used in electrical systems with quite high voltage.

Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.

The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.

Series 1060 HSS-Co Straight Shank High Helix Jobber Drills
TiN Coated - Metric
Heavy duty drill for stainless steel, heat and acid-resistant steels, short chipping and high strength steels. High heat resistance allows drilling in titanium and titanium alloys. TiN coating provides longer tool life.
Point angle: 130°. Helix angle: high. Web thickness: strengthened. Relief angle: normal.
Tolerance of diameter: h8. Tolerance of shank: f11. Manufactured to DIN 338RN.

For fast cutting on contours and hard-to-reach areas, these aluminium oxide cartridge rolls are a long-lasting and cost-effective choice. Ideal for deburring and metal removal, higher grits can also be used for blending and polishing applications.

Features and Benefits
• Spiral wound abrasive constantly exposes a new abrasive surface for product longevity
• Available in a range of roll sizes and grits to suit any application
• Straight form allows for consistent finishing

Typical Applications
• Flash removal
• Edge breaking
• Machine tool mark removal
• Polishing and finishing

The devices of the Dräger REGARD® 3900 series can be used as standalone controllers. You can configure up to 16 measuring channels. In addition, the modular setup enables you to customise the control units to the demands of your plant. You can also embed further features to existing alarms.

York Inox cutting discs are perfect for efficiently cutting metal with minimum material removal and machine wear, thanks to their thin profile. They are suitable for use with all appropriate handheld grinders and can even be used on stainless steel.
There are a wide range of sizes available, with 180mm and 230mm sizes suitable for use on circular saws.

Features and Benefits
• Thin profile allows for quick and efficient cuts with minimal material removal and machine wear
• Wide range of sizes allow for usage on a variety of appropriate handheld grinders and larger sizes can even be used in circular saws

Notes
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°

With all metal construction, these heavy-duty toolboxes are ideal for professional use on job sites. With a yellow epoxy powder coated finish, soft grip carrying handle and lightweight design, the products are available in two sizes to suit your requirements. There is a tote tray for smaller or more frequently used items. Fitted with heavy-duty metal latches designed to stay closed even when in transit.

Features and Benefits
• Heavy duty metal latches protect and secure your tools as well as the padlock eye (padlock sold separately)
• 'V' groove on the old allows for measuring and cutting short lengths of pipes or wood materials
• Black plastic over-riders add durability to the product and help to prevent damage to the most common areas of wear
• Soft grip carry handle allows for ease of transportation

Typical Applications
• Construction Sites
• Electricians
• Plumbers
• DIY

Series 1060 HSS-Co Straight Shank High Helix Jobber Drills
TiN Coated - Metric
Heavy duty drill for stainless steel, heat and acid-resistant steels, short chipping and high strength steels. High heat resistance allows drilling in titanium and titanium alloys. TiN coating provides longer tool life.
Point angle: 130°. Helix angle: high. Web thickness: strengthened. Relief angle: normal.
Tolerance of diameter: h8. Tolerance of shank: f11. Manufactured to DIN 338RN

The ACDC-54NAV clamp-on power meter offers AC/DC current measurements to 1000 A, AC/DC voltage to 1000 V, temperature capabilities, and wide jaws to handle large conductors up to 1.6″ (40 mm) for high voltage industrial environments.



This clamp-on multimeter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.

Elbow Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Dräger REGARD® 2400 and 2410 are flexible small control units for detection of toxic gases and oxygen as well as combustible gases and vapours. Combined with the Dräger transmitters or sensing heads Dräger REGARD® 2400 or 2410 forms a low-maintenance gas detection system for reliable protection.