Type of Luminaire : High Efficacy/Standard High Bay Set Model No : NYV20104BE1A Type of Light Source LED Power Input : 200W System Lumen Output : 28570 lm System Efficacy : 143 lm/W Power Voltage : 220-240V Power Factor : 0.95 Lifetime : 50000H(L70) CCT : 4000K CRI : 80 Input Frequency : 50/60Hz Dimming : non-Dimmable Beam Angle : 60deg. IP Rating : 65 Ambient Temperature : -30 - 50°C Surge Protection : 10kVA Dimensions : 320mmx172mm Weight : 3.9 kg Body : ADC(Black)
Robust, precise, safe – the Dräger Polytron 2000 is a stationary gas detector for measuring standard gases (O2, H2S, NH3, Cl2, CO). With the new, pre-calibrated DrägerSensor MEC and robust design, this gas transmitter is a reliable and economic solution for non-explosion proof areas.
A versatile and rugged tool for high current applications
Confidently take reliable readings with true-rms, Fluke 355 and 353 digital clamp meters; the tool of choice for high current clamp-on amp meter sizes up to 2000 A. The extra wide jaws easily clamp around large conductors, which are typically found in high current applications. The extra robust design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when performing high power measures.
Accurate peak measurements are possible using the in-rush inrush mode, ideal for motor and inductive loads. The 355 also measures voltage and resistance, making it an ideal clamp meter for utility, electrical contractors and industrial service technicians.
Single sided perfo panel racks constructed from sheet steel with a hard wearing powder coated finish. Come complete with hook kits with varying pieces included. Images are for illustration purposes only. Tools not included.
These single-hexagon sockets possess six points which offer a more positive location, particularly on worn or rounded nuts and require a one-sixth turn to engage the next point of the socket. Available in a variety of metric sizes and manufactured from chrome vanadium steel.
Features and Benefits • Manufactured from a resilient chrome vanadium steel • Available in a variety of metric sizes to suit your application • Polished finish repels grime and dirt for an easy clean • 6 point sockets require only one-sixth of a turn to engage the next point
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
High-quality 'A' Shape Mounted Points - with a Shank Diameter of 6mm.
Features and Benefits • All points are aluminium oxide with 'rubenite™' as standard, providing vastly improved durability & reliability • Available in a wide range of shapes and sizes to suit every need
Typical Applications • Suitable for portable die and straight hand grinders • For all general purpose grinding and deburring on steels and most metals
Notes • Shank diameters are metric as listed below with inch sizes available on request • Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
This LED head torch can deliver an output of 120 lumens which can illuminate up to 115 meters away. The sturdy headlamp body tilts up to 90 degrees, allowing you to focus the light where it's required. Fully rechargeable.
Features and Benefits • 3 working modes: Full power, half power and flashing to suit your needs • Rechargeable Li-on Battery included • 1.5 metre USB charging cable included to recharge as needed • Impact resistance (drop test) 1m making for a robust product • Operating temperature of -20 - 50°C for versatility in use • IPX-4 waterproof and designed for use outdoors in heavy rain
Gembok dengan body Laminated Steel Rekeyable Pin Tumbler 2-1/8in (54mm) ProSeries? Weather Tough?
Fitur Produk: • Ideal untuk kondisi outdoor – penutup Weather Tough? melindungi kunci dari air, es dan kotoran • Cover Merah, penutup visibilitas tinggi untuk perbedaan antara departemen, karyawan, akses, dll. • ProSeries? Padlocks dirancang untuk aplikasi Komersial / Industri • Body baja 2-1/8in (54mm) tahan terhadap serangan fisik • Shackle dengan Tinggi 1-1/8in (29mm) dan diameter 5/16in (8mm), paduan boron yang diperkeras untuk ketahanan pemotong yang unggul • Mekanisme penguncian bola ganda membantu mencegah dari Pencurian • Keamanan tinggi, silinder 5-pin yang dapat dipasang kembali dengan pin spool hampir tidak mungkin untuk dicuri • Lebar Body: 2-1/8in (54mm) • Dimensi keseluruhan A: 5/16in (8mm) B: 1-1/8in (29mm) C: 7/8in (22mm) • Warna: Merah
Features one watt LED light and side LED tube light, two position handle. 5V 4Ah sealed lead acid battery. Supplied with AC/DC mains charger and 12V DC car plug adaptor.
Features and Benefits • 2 million candle power, super bright 1W front LED light, side LED tube light and two position handle • Impressive beam distance of up to 75m • Run time of up to 6 hoyrs from the main beam mode, 30 hours from the side beam • Supplied with main charger and in-car charger
Gembok Bluetooth? Indoor untuk pengunaan Personal – 1-29/32in (47mm)
Fitur Produk: • Aplikasi Master Lock? Vault Home, dirancang untuk penggunaan pribadi, mendukung hingga 10 kunci • Jangan pernah khawatir tentang kombinasi yang terlupakan! • Berbagi akses dengan orang lain – sementara atau permanen • Bagikan akses 24/7 atau batas untuk siang atau malam • Pantau riwayat akses • Akses backup menggunakan kode arah pada keypad kunci • Notifikasi & pengingat baterai rendah pada gembok, dapat dilihat dalam aplikasi • Dilengkapi dengan baterai CR2450 yang mudah diganti • ?Battery jump? memungkinkan akses sementara jika baterai mati saat terkunci • Pengaturan Mode Locker memungkinkan penyimpanan di dalam loker • Lebar Body: 1-29/32in (47mm) • Dimensi Keseluruhan A: 9/32in (7mm) B: 7/8in (22mm) C: 13/16in (20mm)