Produk

Double sided perfo panel trolleys constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.
Tools not included.

The Dräger CPS 5800 is a limited-use chemical protective suit for industrial applications and operations on board that involve a gaseous, liquid or solid hazardous substance.

• T-shank
• For cutting wood and wood-based products (plywood, chipboard etc.) , plastic and metal (thin or perforated sheet)
• Compatible with the majority of modern jigsaws
• Pack of 5

Compact true-rms meter for accurate electrical installation and troubleshooting



The Fluke 110 is a versatile multimeter for electrical measurements and troubleshooting. Trusted by residential and commercial electricians for troubleshooting and maintenance. The Fluke 110 is intended for professional use where true-rms accuracy is required.



Key product capabilities

- True-rms ac voltage for accurate measurements on non-linear signals

- Great white LED backlight for working in dark areas

- Resistance and continuity

- Min./Max./Average to record signal fluctuations

- CAT III 600 V safety rating

Ideal for off-hand grinding and deburring, the 'W' shape mounted points from Kennedy® make excellent work of medium and heavy stock. The aluminium oxide abrasive is a naturally sourced abrasive that produces less dust while effectively removing stock as required.

Features and Benefits
• All points are aluminium oxide with rubenite™ as standard - perfect for all general-purpose grinding and deburring on steels and most metals
• Designed for reliability
• Non-toxic abrasive

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
• Compatible with the Kobe® FDG180m Straight Die Grinder

Connector to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Gembok dengan body Laminated Steel Rekeyable Pin Tumbler 2-1/8in (54mm) ProSeries? Weather Tough?

Fitur Produk:
• Ideal untuk kondisi outdoor – penutup Weather Tough? melindungi kunci dari air, es dan kotoran
• Cover Merah, penutup visibilitas tinggi untuk perbedaan antara departemen, karyawan, akses, dll.
• ProSeries? Padlocks dirancang untuk aplikasi Komersial / Industri
• Body baja 2-1/8in (54mm) tahan terhadap serangan fisik
• Shackle dengan Tinggi 1-1/8in (29mm) dan diameter 5/16in (8mm), paduan boron yang diperkeras untuk ketahanan pemotong yang unggul
• Mekanisme penguncian bola ganda membantu mencegah dari Pencurian
• Keamanan tinggi, silinder 5-pin yang dapat dipasang kembali dengan pin spool hampir tidak mungkin untuk dicuri
• Lebar Body: 2-1/8in (54mm)
• Dimensi keseluruhan A: 5/16in (8mm) B: 1-1/8in (29mm) C: 7/8in (22mm)
• Warna: Merah

Type of Luminaire : High Efficacy/Standard High Bay
Set Model No : NYV20102BE1A
Type of Light Source LED
Power Input : 140W
System Lumen Output : 20000 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 4000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 280mmx172mm
Weight : 2.8 kg
Body : ADC(Black)

Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.

Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive

Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical

Standards
• Conforms to DIN standards

Ideal for off-hand grinding and deburring, the 'W' shape mounted points from Kennedy® make excellent work of medium and heavy stock. The aluminium oxide abrasive is a naturally sourced abrasive that produces less dust while effectively removing stock as required.

Features and Benefits
• All points are aluminium oxide with rubenite™ as standard - perfect for all general-purpose grinding and deburring on steels and most metals
• Designed for reliability
• Non-toxic abrasive

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
• Compatible with the Kobe® FDG180m Straight Die Grinder

Double sided perfo panel trolleys constructed from sheet steel with a hard wearing powder coated finish. Supplied with 6 perfo panels with a 40 piece hook kit.
Images are for illustration purposes only.
Tools not included.

SPKN Milling Inserts

Square Insert

Insert Grade QP40
(P40) Uncoated. For rough medium and finish milling of tough Steels and Stainless Steels including interrupted cutting.