Produk

Connector to Male Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Discflo offers two lines of sanitary pumps, the SP Series and MIS Series. Both series meet 3-A sanitary and international hygiene standards and USDA requirements.
They can be supplied in Clean-in-Place or Steam-in-Place versions, and in a variety of metallurgy to meet the user’s requirements.

• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected

• Continuous self-test so you always know it’s working

• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC

• Audible/Silent mode for added convenience

Gembok dengan badan kuningan yang padat dan ekstra tebal – lebar 60mm

Fitur Produk
– Gembok dengan bodi kuningan yang padat dan ekstra tebal, 60mm lebar body, daya tahan dan tahanan korosi
– Shackle baja yang diperkeras untuk ketahanan pemotongan yang ekstra
– Memiliki 6-pin Silinder untuk ketahanan pick maksimum
– Tuas pengunci ganda untuk perlindungan dari pencongkelan dan palu
– Garansi Seumur Hidup Terbatas
– Lebar Body: 60mm
– Dimensi Keseluruhan, A: 9mm B: 36mm C: 33mm

- Relative time clocks at MIN, MAX and AVG provide a time reference for important events

- The Electronic Offset function enables thermocouple error compensation to maximize overall accuracy

- Measures J, K, T, and E thermocouple types

- Result reading in ºC, ºF or Kelvin (K)

- Splash and dust resistant bag with shock absorbing holster

- Front panel that is easy to set up and operate

- Sleep mode increases battery life, typical 1000 hours of battery life

- The battery cover makes it easy to replace the battery without opening the calibration seal

- The optional ToolPak accessory allows the thermometer to be hung from any metal object (with a rare earth magnet) or secured around a pipe (with a - hook-and-loop strap) for hands-free operation.

- 3 year warranty

Constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.

Tailor-made for use under extreme conditions: The gas-tight Dräger CPS 7900 provides excellent protection against industrial chemicals, biological agents, and other toxic substances. Its innovative material qualifies the CPS 7900 equally well for work in explosive areas and for handling cryogenic substances.

Gembok dengan badan kuningan padat yang berlapis Nikel – 30mm

Fitur Produk:
• Badan kuningan yang padat dan berlapis nikel dengan lebar 30mm untuk kekuatan, daya tahan dan ketahanan korosi
• Shackle stainless steel untuk ketahanan maksimum terhadap korosi
• Silinder 4-pin
• Tuas pengunci ganda ekstra untuk membantu mencegah dari Pencurian
• Lebar Body: 30mm
• Dimensi keseluruhan A: 5mm B: 17mm C: 16mm

Type of Luminaire : High Efficacy/Standard High Bay
Set Model No : NYV20155BE2A
Type of Light Source LED
Power Input : 75W
System Lumen Output : 10710 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 240mmx166mm
Weight : 1.99 kg
Body : ADC(Black)

Our submersible pumps often go to work where centrifugal, progressive cavity, lobe, and chopper pumps have failed. Their unique design and our state-of-the-art technology tackle even the toughest applications with ease.

Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.

Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive

Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical

Standards
• Conforms to DIN standards

Spiral wound with tear-resistant backing fabric.

Features and Benefits
• For grinding and finishing edges, profiles, welded seams.
• To be used on designated rubber drum holder
• Maximum permitted peripheral speed of 30m/s
• P60 = Coarse, P80 = Medium, P150 = Fine.