Produk

Spiral wound with tear-resistant backing fabric.

Features and Benefits
• For grinding and finishing edges, profiles, welded seams.
• To be used on designated rubber drum holder
• Maximum permitted peripheral speed of 30m/s
• P60 = Coarse, P80 = Medium, P150 = Fine.

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

These carbide burrs are designed for cylindrical end cutting of low feed, high speed materials. Available in a variety of sizes with varying cut capabilities.

Features and Benefits
• Manufactured from durable carbide for tool longevity
• Rapid cut (Cut 3) burrs are suited for use on softer non-ferrous and plastic materials
• Chipbreaker (Cut 9) burrs are suited for use on cast iron, carbon steel, alloy steel 50RC and 60RC
• Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel up to HRC65 hardness
• Ideal for light stock removal at high rpms

Typical Applications
• Deburring

Notes
• Not suitable for milling large amounts of material
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used
• Always ensure that the tool is rated to the recommended operating speed of the burr

Our horizontal multistage centrifugal pumps are made of multiple Discpacs, which feed into one another. These stages allow for higher levels of control over the output pressure.

Type of Luminaire : High Bay Special Environment
Set Model No : NNFC2004388
Type of Light Source LED
Power Input : 200W
System Lumen Output : 28000 lm
System Efficacy : 140 lm/W
Power Voltage : 220-240V
Power Factor : 0.9
Lifetime : 50000H(L70)
CCT : 4000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 110deg.
IP Rating : 65
Ambient Temperature : -40 - 60°C
Dimensions : 345mmx182mm
Weight : 3.2 kg
Body : ADC(Black)

Constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.

Constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.

Type of Luminaire : High Efficacy/Standard High Bay
Set Model No : NYV20150BE2A
Type of Light Source LED
Power Input : 75W
System Lumen Output : 10710 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 240mmx166mm
Weight : 1.99 kg
Body : ADC(Black)

Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.

Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive

Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical

Standards
• Conforms to DIN standards

Gembok dengan badan kuningan yang padat dan ekstra tebal – lebar 60mm

Fitur Produk
– Gembok dengan bodi kuningan yang padat dan ekstra tebal, 60mm lebar body, daya tahan dan tahanan korosi
– Shackle baja yang diperkeras untuk ketahanan pemotongan yang ekstra
– Memiliki 6-pin Silinder untuk ketahanan pick maksimum
– Tuas pengunci ganda untuk perlindungan dari pencongkelan dan palu
– Garansi Seumur Hidup Terbatas
– Lebar Body: 60mm
– Dimensi Keseluruhan, A: 9mm B: 36mm C: 33mm

The Dräger SPC 2400 is a reusable suit, which is reliable in protecting you from liquids and dust. The suit is available in a specially robust version made of PVC or as a light, water vapour permeable version made of flexothane.

• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected

• Continuous self-test so you always know it’s working

• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC

• Audible/Silent mode for added convenience