Produk

These extra-heavy-duty rotational moulded IBC (intermediate bulk container) spill pallets are for single or double IBC storage applications. 100% polyethylene construction, they're designed for total flexibility and ease of positioning.

Features and Benefits
• Contains spills to prevent accidents and waterway contamination
• Made from durable polyethylene to protect against the elements
• Fitted with grids for added support
• Forklift pockets in the base make for easy transport
• Corrosion-free and suitable for containing corrosive chemicals
• Removable decking assists cleaning
• Reusable for a cost-effective solution to spill control and chemical storage

Ideally adapted for working in restricted areas, this cordless impact wrench is lightweight (2.4 lbs - 1.1 Kg) and compact (6.3 in - 161 mm length). Its high power (84 ft.lbs - 115 Nm max torque) in reverse offers performance and durability. The SIDE 2 SIDE Single-hand forward / reverse operation and built-in LED are convenient for every day general mechanical applications in workshops. The CP8818 series is available as a bare tool or in packs with two batteries and one charger.

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.

The cordless impact wrench is compact (with a length of 6.1 in / 152 mm) and lightweight (4 lbs. / 1.8 kg), which makes it ideal for general mechanic applications, especially in restricted areas. The ergonomic thermoplastic rubber over-moulded handle offers comfort and a great grip. Performance is enhanced due to its power (150 ft.lbs – 205 Nm) to weight ratio. SIDE 2 SIDE single-hand forward/ reverse position is ergonomically designed for optimal usage. The CP8828 series is available as a bare tool or in packs with two batteries and one charger.

Bulkhead Adaptors


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

HILUBE

MORESCO-HILUBE, our high temperature lubricating oil, is used in harsh environments as the base oil of greases used with bearings subject to the high temperatures of automotive electrical components and as the lubricating oil used with bearings of machinery such as OA machinery, with bread ovens, and with the drive section of drying furnaces.

L-150 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-320 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-560 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-830 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).

The Fluke VR1710 Power Quality Recorder, is a single-phase plug-in voltage quality recorder that offers an extremely easy-to-use solution for detecting and recording power quality problems, enabling immediate action and minimizing downtime. The VR1710 single-phase recorder meets the needs of maintenance and facilities management personnel in large service, utility, and industrial service organizations where power quality is critical to their business operations. Power quality parameters include average RMS, transients, flicker, and harmonics up to the 32nd recorded using a user-selectable averaging period from 1 second to 20 minutes.

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12547LD2031
Type of Light Source : LED
Power Input : 432W
System Lumen Output : 65500 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 54deg.
Beam Angle : 34deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC

York non-woven fibre hand pads are ideal for cleaning, blending and finishing applications. They are available in a range grades from non abrasive to coarse to suit any application. They are supplied in packs of 10 to ensure they can get you through any project.

Features and Benefits
• Available in a range of grades to suit any application
• Supplied in packs of 10 to ensure they can get you through any project

This range of straight jaw, external circlip pliers is suited for heavy duty, regular and industrial use. Constructed from resilient chrome vanadium steel, fully hardened and tempered, each product also boasts PVC cushion grip handles. Completed by a coil sprung to aid operation. Available in three sizes.

Features and Benefits
• Manufactured from industrial quality chrome vanadium steel that has been fully hardened and tempered for durability
• PVC cushion grip handles boost user comfort and control whilst using
• Coil spring action makes operating the tool easier and lessens hand fatigue
• Available in three sizes to suit your needs

Typical Applications
• Construction
• DIY
• Automotive
• Engineering

Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications.

Features and Benefits
• High speed steel construction for increased tool hardness
• Spiral flutes for high quality centre holes

Standards
• Manufactured to BS 328 : Part 2 : 1986
• DIN 333A, ISO 866
• ISO 2540, ISO 2541