Produk

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12347LD2031
Type of Light Source : LED
Power Input : 264W
System Lumen Output : 41000 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 60deg.
Beam Angle : 54deg.
IP Rating : 75deg.
Ambient Temperature : -20 - 35°C
Dimensions : 422mmx534mmx340mm
Body : ADC

Professional extended air die grinder suitable for use on a wide range of applications with an extended spindle for extra reach in "hard to get at" areas

Features and Benefits
• Extended spindle allowing two-handed operation
• Safety release throttle prevents accidental start-ups
• Front exhaust blows away dust and debris
• Fitted with long collet nut
• Supplied with two collet spanners and a comprehensive instruction manual

Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

The Dräger Alcotest® 9510 is an advanced breath alcohol measuring instrument for evidential applications. It is designed to comply with national and international requirements and regulations (OIML R 126). With dual sensor technology, intuitive color touch screen interface, and modern design the Alcotest® 9510 sets superior standards.

M18 ONEFHIWF1DS-0C
• The M18 FUEL D-Handle high torque impact wrench delivers 2,576Nm of fastening torque replacing AC, petrol or pneumatic solutions
• Delivers up to 2,711Nm of nut-busting torque that enables bolts up to M48 to be unfastened
• The 4 -Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximize application versatility

A quick and easy solution to contain spills. Contains spills in the bund.
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.

Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong

Notes
• Drums not included

3M 361F
Tough resin-bonded aluminium oxide disc, for grinding and stock removal. Perfect for applications such as weld grinding and finishing.

Features and Benefits
• 3M Roloc attachment enables efficient yet secure installation and removal of the disc
• Class-leading highly-durable aluminum oxide abrasive grains cut fast and perform well on many surfaces
• Tough YF-weight, polyester backing supports medium-pressure applications and provides consistent performance
• Heat-resistant resin coating bonds abrasive to backing for extreme durability under pressure, heat, and water

Notes
• Maximum rpm:
25mm discs = 25000rpm
38, 50 and 75mm discs = 20000rpm

• Menghilangkan gemuk, oli, kotoran & gumpalan lengket yang membandel
• Aksi cepat
• Mudah dilapbersih dan dibilas dengan air

Unique in its class, this cordless 1/2'' impact is designed for light vehicle tire changing operations and daily general mechanical tasks on light and heavy vehicles. The two shut off positions guarantee high tightening quality and avoid over-tightening. The CP8849 delivers high power torque in reverse up to 850+ ft.lbs / 1,150+ Nm. The ergonomic touch pad on the back of the tool offers increased comfort. The Chicago pneumatic 8849 series comes in 2 sizes: 1/2'' short anvil and 1/2" 2'' long anvil. Both models are available as a bare tool or in packs with two batteries and one charger.

This compact and robust handheld breath alcohol measuring device is especially designed for advanced screening applications. Ideal for use by police, commerce and industry as an alcohol screening device. The Alcotest® 7510 can in many countries and markets be used as an evidential device.

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

Be proactive, not reactive



Plan your proactive maintenance (PM) program and make it a reality. To get started, you need a feature that makes it easy for you to organize your pictures and inspection routines. With the TiS75+ you are ready to implement a successful PM program.

- Asset Tagging allows you to easily compare asset images over time.

- Scanning the QR code on each asset creates a timeline of your inspections.

- Use saved time (25% on average spent setting up thermal images) to analyze asset images to see trends, diagnose problems and fix problems before they become failures.



Choose TiS75+



These new Fluke thermal cameras stay true to our mantra of giving customers more than they pay for. The Fluke TiS75+ offers features to help you tackle almost anything you'll encounter in the field. In addition to the features mentioned above, the TiS75+ also includes the ability to:

- IS3 and AVI video recording

- Streaming data

- 384 x 288 thermal resolution

- High temperature range—up to 550 °C

- Dew point calculation

LUBCASTER

FORGING is processing method of creating an objective shape by compressing metallic substance in between molds. LUBCASTER is essential lubricants for producing auto engine components and safety parts.

F-55 : Light yellow transparent mucoid fluid Usable with high dilution by the high adhesion property, suitable to low temperature mold.
F-5110 : Black It is a graphite type. It has high lubricity and extends mold life.