kategori Produk
BRAND
FlukeKennedyMilwaukeeMakitaYorkBottKobe3MSealeyFlexovitSherwoodGranlundDragerGysSitesafeMatlockSenatorSuper StrengthChicago PneumaticPanasonicYamotoKennedy-ProSummitechWD 40KengripSwissBurrEdisonSolent Spill ControlKennedy Red-Hot-DipKobe Blue LineKobe Red LineHaloTuffsafeIndexaAvonYamaloyCotswoldSwisstechAtlas WorkhokdersThorOxfordRutlandCheetahMaster LockESABCIGWELDMorescoDiscfloCRCGastronMSASiemensISCSchneider
Produk
Kategori Produk
Industrial 90° air angle die grinder - This versatile air grinder is suitable for use with a wide range of abrasive stones and spiral bands. With a compact design it is well suited to working in confined spaces
Features and Benefits
• Precision geared or longer life and smoother running
• Safety lever throttle prevents accidental start-ups
• Ideal for tight access applications
• Rear exhaust directs away from the workpiece
• Supplied with two collet spanners and a comprehensive instruction manual
Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications
Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands
Features and Benefits
• Precision geared or longer life and smoother running
• Safety lever throttle prevents accidental start-ups
• Ideal for tight access applications
• Rear exhaust directs away from the workpiece
• Supplied with two collet spanners and a comprehensive instruction manual
Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications
Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands
Strong. reliable. Accurate At Fluke, we know accidents happen, tools that are dropped, kicked, stepped on, or bumped. You do not have to change the tool if it falls off the workbench or is splashed with water or dirt. That's why we designed the TiS55+ thermal camera to withstand drops from a height of 2 meters and is water/dust resistant (IP54). You need to know that your camera is ready to use at all times.
No need for a clipboard
With so many inspections in one day, it can be difficult to remember what you saw and where it was. Maybe you brought a clipboard with you to take notes. The TiS55+ comes with a built-in personal assistant, which means you can get rid of the clipboard and have all the information you need in the pictures you take, including:
- Voice notes
Records up to 60 seconds per thermal image
Identify exactly what you see in realtime
- IR-PhotoNotes
Take a photo of the asset number and other identifiers
Use as a reference when viewing thermal images on your computer
- Asset Tagging
Sort your images by assets
Scan the QR code on your asset and start taking thermal images
Connect your camera to your computer to view images, sorted by asset
No need for a clipboard
With so many inspections in one day, it can be difficult to remember what you saw and where it was. Maybe you brought a clipboard with you to take notes. The TiS55+ comes with a built-in personal assistant, which means you can get rid of the clipboard and have all the information you need in the pictures you take, including:
- Voice notes
Records up to 60 seconds per thermal image
Identify exactly what you see in realtime
- IR-PhotoNotes
Take a photo of the asset number and other identifiers
Use as a reference when viewing thermal images on your computer
- Asset Tagging
Sort your images by assets
Scan the QR code on your asset and start taking thermal images
Connect your camera to your computer to view images, sorted by asset
The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.
Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite
Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite
Notes
• Available in sizes 0.25mm -20.00mm
Standards
• Manufactured to BS 328/DIN338RN
Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite
Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite
Notes
• Available in sizes 0.25mm -20.00mm
Standards
• Manufactured to BS 328/DIN338RN
Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12337LD2031
Type of Light Source : LED
Power Input : 267W
System Lumen Output : 40400 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 64deg.
Beam Angle : 53deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 422mmx534mmx340mm
Body : ADC
Set Model No : NYS12337LD2031
Type of Light Source : LED
Power Input : 267W
System Lumen Output : 40400 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 64deg.
Beam Angle : 53deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 422mmx534mmx340mm
Body : ADC
Cutting fluids are used when metals or similar materials are cut and made into finished products by machine tools such as lathes, machining centers, and grinding machines. MORESCO is developing cutting fluids that have long service lives, which reduces the amount of waste fluid that is generated and thereby contributes to environmental improvements.
Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.
Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.
Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.
Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.
A quick and easy solution to contain spills. Contains spills in the bund.
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.
Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong
Notes
• Drums not included
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.
Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong
Notes
• Drums not included
3M 361F
Tough resin-bonded aluminium oxide disc, for grinding and stock removal. Perfect for applications such as weld grinding and finishing.
Features and Benefits
• 3M Roloc attachment enables efficient yet secure installation and removal of the disc
• Class-leading highly-durable aluminum oxide abrasive grains cut fast and perform well on many surfaces
• Tough YF-weight, polyester backing supports medium-pressure applications and provides consistent performance
• Heat-resistant resin coating bonds abrasive to backing for extreme durability under pressure, heat, and water
Notes
• Maximum rpm:
25mm discs = 25000rpm
38, 50 and 75mm discs = 20000rpm
Tough resin-bonded aluminium oxide disc, for grinding and stock removal. Perfect for applications such as weld grinding and finishing.
Features and Benefits
• 3M Roloc attachment enables efficient yet secure installation and removal of the disc
• Class-leading highly-durable aluminum oxide abrasive grains cut fast and perform well on many surfaces
• Tough YF-weight, polyester backing supports medium-pressure applications and provides consistent performance
• Heat-resistant resin coating bonds abrasive to backing for extreme durability under pressure, heat, and water
Notes
• Maximum rpm:
25mm discs = 25000rpm
38, 50 and 75mm discs = 20000rpm
A professional air angle grinder offering a high standard and superb value combined with the design elements of a modern industrial classic. This powerful and versatile air grinder is suitable for use with a wide range of sanding and grinding applications. With a compact design it is well suited to working in confined spaces.
Features and Benefits
• Lightweight and compact
• Front exhaust for user comfort and clearance of dust
• Fully adjustable safety guard that locks in to position
Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications
Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
Features and Benefits
• Lightweight and compact
• Front exhaust for user comfort and clearance of dust
• Fully adjustable safety guard that locks in to position
Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications
Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
Gembok LOTO, Teal Zenex? Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan tinggi Shackle 1-1/2in (38mm)
Fitur Produk:
• 410 adalah Gembok Pengaman Termoplastik
• Didesain khusus untuk aplikasi lockout tagout (LOTO)
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Silinder keamanan tinggi, disediakan untuk keselamatan
• Penahan kunci – memastikan gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Merah termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36
Fitur Produk:
• 410 adalah Gembok Pengaman Termoplastik
• Didesain khusus untuk aplikasi lockout tagout (LOTO)
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Silinder keamanan tinggi, disediakan untuk keselamatan
• Penahan kunci – memastikan gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Merah termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36
• Menghilangkan gemuk, oli, kotoran & gumpalan lengket yang membandel
• Aksi cepat
• Mudah dilapbersih dan dibilas dengan air
• Aksi cepat
• Mudah dilapbersih dan dibilas dengan air
Die Realasing Fluids | GRAPHACE
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.
Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite
Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite
Notes
• Available in sizes 0.25mm -20.00mm
Standards
• Manufactured to BS 328/DIN338RN
Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite
Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite
Notes
• Available in sizes 0.25mm -20.00mm
Standards
• Manufactured to BS 328/DIN338RN