Produk

Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks.

Features and Benefits
• Highly durable
• Highly effective - both performance effective and cost effective

Typical Applications
• Suitable to remove paint, dirt, rust and stubborn deposits

B7444 - Suitable for production and assembly applications. Twin hammer mechanism. 1/2" square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.
Forward: position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.
Reverse: position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.
Square : 1/2"
Maximum torque: 813Nm
Recommended air pressure: 6.2bar/90psi.
Air consumption:(113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").

*Based on a 15 second cycle per minute average use.

The Dräger Alcotest® 6000 allows the professional user to perform a breath alcohol test with speed and precision. The measuring technology of this small and user-friendly portable measuring device has already been proven worldwide and has been sold over 1,000,000 times.

For use with Kennedy grease guns and all other hydraulic grease equipment.

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

This straight die grinder kit includes a straight die grinder with 3 and 6mm collets, collet spanner, 10 assorted mounted points and robust blow moulded case. The die grinder is suitable for polishing, buffing and grinding. Boasting a robust and durable single piece aluminium body, a 1/2hp motor and precision balanced bearings to provide reliability in the most demanding of industrial/automotive applications. Finished with a trigger that has a safety catch to prevent accidental starts.

Features and Benefits
• Comprehensive kit ensures you have the right piece to hand
• Manufactured from durable aluminium for product longevity
• Safety catch on the trigger to prevent accidental starting
• Supplied in a robust, blow moulded case to store and transport your tool

Contents
• 2 x Collet Spanners
• Straight Die Grinder
• 1 x 3mm Collet
• 1 x 6mm Collet
• 10 x Assorted Mounted Points

Typical Applications
• Suitable for polishing, buffing and grinding in industrial and automotive settings

This powerful and versatile air grinder is suitable for use with a wide range of sanding and grinding applications. With a ultra compact design, it is well suited to working in confined or awkward spaces.

Features and Benefits
• Lightweight and durable single piece aluminium body
• Safety release throttle prevents accidental start-ups
• Front exhaust blows away dust and debris
• Precision balanced bearings provide reliability in the most demanding of industrial/automotive applications

Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes
• Supplied with two collet spanners and a comprehensive instruction manual
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

Gembok LOTO, Dielectric Zenex? Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan Nylon Shackle 1-1/2in (38mm)

Fitur Produk:
• 406 adalah Gembok Pengaman Termoplastik Dielektrik
• Shackle plastic-nya membantu mencegah sengatan listrik dan juga mencegah arus listrik dari Shackle ke kunci
• Semua komponen tidak memicu percikan dan non-magnetis – plastik, tembaga, kuningan
• Didesain khusus untuk aplikasi penandaan penguncian
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Biru termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36

The Dräger Alcotest® 7000 sets new standards in alcohol test devices. Its benefits include a wider temperature- and measuring range, low maintenance requirements and various networking options. In addition, the device can perform alcohol tests via both a mouthpiece and a funnel. Reliable alcohol tests have never been so fast, simple and efficient.

M18 FN18GS-0X0
• Best-in-class power to consistently seat nails sub-flush to the surface in hardwoods
• Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge
• No gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance

Industrial 90° air angle die grinder - This versatile air grinder is suitable for use with a wide range of abrasive stones and spiral bands. With a compact design it is well suited to working in confined spaces

Features and Benefits
• Precision geared or longer life and smoother running
• Safety lever throttle prevents accidental start-ups
• Ideal for tight access applications
• Rear exhaust directs away from the workpiece
• Supplied with two collet spanners and a comprehensive instruction manual

Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

Strong. reliable. Accurate At Fluke, we know accidents happen, tools that are dropped, kicked, stepped on, or bumped. You do not have to change the tool if it falls off the workbench or is splashed with water or dirt. That's why we designed the TiS55+ thermal camera to withstand drops from a height of 2 meters and is water/dust resistant (IP54). You need to know that your camera is ready to use at all times.

No need for a clipboard
With so many inspections in one day, it can be difficult to remember what you saw and where it was. Maybe you brought a clipboard with you to take notes. The TiS55+ comes with a built-in personal assistant, which means you can get rid of the clipboard and have all the information you need in the pictures you take, including:

- Voice notes
Records up to 60 seconds per thermal image
Identify exactly what you see in realtime
- IR-PhotoNotes
Take a photo of the asset number and other identifiers
Use as a reference when viewing thermal images on your computer
- Asset Tagging
Sort your images by assets
Scan the QR code on your asset and start taking thermal images
Connect your camera to your computer to view images, sorted by asset