Produk

For use in any general maintenance environment with the CP7776 1" impact wrench designed for bolting & unbolting applications. Delivers a reverse high torque up to 1,770 ft.lbs / 2,400 Nm. The pinless closed reinforced rocking dog impact mechanism and metal housing offer high durability. The CP7776 series is composed of 2 models: 1" short anvil and 1" long anvil (6" anvil).

This series of ultralight, ergonomic impact wrenches, designed with a durable twin hammer clutch mechanism is highly recommended. The advantages of pneumatic technology are reinforced by the lightweight composite body design and an aluminium clutch housing for long-term use. Bolt mounting and removal is facilitated by ergonomic options such as an integrated bail and rubber grip handle. The CP82 series is available in 9 models with pin or ring dual socket retainer for a maximum reverse torque from 450 up to 1,650 Nm (332 up to 1217 ft.lb). The range extends from 3/8" to 3/4".

This 1" impact wrench, designed for tire changing applications and general maintenance with its high torque of 1,620 ft.lbs / 2,200 Nm is highly recommended. The rocking dog impact mechanism and metal housing offer high durability. The CP7778 series is composed of 2 models: 1" short anvil and 1" long anvil (6" anvil)

With a hook-on action, this connector securely grips the grease nipple while in use. Manufactured from steel and fitted with a 1/8" BSP thread.



Features and Benefits
• Manufactured from durable steel making for a robust product
• Securely grips the grease nipple whilst in use
• Hook-on fixture for simple application

Typical Applications
• Automotive
• Engineering

Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks.

Features and Benefits
• Highly durable
• Highly effective - both performance effective and cost effective

Typical Applications
• Suitable to remove paint, dirt, rust and stubborn deposits

Designed for tire changing applications, this 1" impact wrench with its high torque of 1,920 ft.lbs / 2,600 Nm is highly recommended. The pinless closed reinforced rocking dog impact mechanism and metal housing offer high durability. The CP7782 series includes 3 models: 1" short anvil, 1" long anvil (6" anvil) and 1" long anvil (6" anvil) with spline retainer.

Designed for heavy tire changing applications with its torque limited in forward of 370 ft.lbs / 500 Nm and its maximum torque in reverse of 1,920 ft.lbs / 2,600Nm, the 1" impact wrench CP7782TL series limits the risk of over tightening during the tightening phase, while at the same time being very powerful once nuts or bolts have to be removed. In addition, the pinless closed reinforced rocking dog impact mechanism and metal housing offer high durability.

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NNP19940031
Type of Light Source : LED
Power Input : 120W
System Lumen Output : 15600 lm
Power Voltage : 110-240V
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 60deg.
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -40 - 50°C
Dimensions : 304mmx310mmx296mm
Body : ADC

M18 FRT-0X0
• POWERSTATE™ Brushless Motor delivers up to 3X longer tool life than the leading cordless competitor
• Manufactured with premium metal components
• Premium alloy steel jaws deliver up to 2X longer life

Gembok LOTO, Dielectric Zenex? Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan Nylon Shackle 1-1/2in (38mm)

Fitur Produk:
• 406 adalah Gembok Pengaman Termoplastik Dielektrik
• Shackle plastic-nya membantu mencegah sengatan listrik dan juga mencegah arus listrik dari Shackle ke kunci
• Semua komponen tidak memicu percikan dan non-magnetis – plastik, tembaga, kuningan
• Didesain khusus untuk aplikasi penandaan penguncian
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Biru termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36

Optimal fastening and unbolting processes with this ultra lightweight 1" impact wrench. Featuring a pinless closed reinforced rocking dog impact mechanism and metal housing, this tool is designed to optimise tire changing. It delivers a maximum reverse torque up to 1,770 ft.lbs / 2,400 N. The CP7783 series consists of 2 models: 1" short anvil and 1" long anvil (6" anvil).

Series J100 - Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.

Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.