Produk

These food-grade plastic water containers from Kennedy® store and dispense large quantities of water. Secured via a collared screw top lid, each container features an on-off tap for easy dispensing and quick shut-off.

The integrated handle allows for easy transport, while the sturdy plastic construction provides reliable upright water storage.

Features and Benefits
• On-off tap for spill-free dispensing
• Moulded integral handle allows for easy transportation
• Manufactured from food-grade plastic for safety and hygiene
• Collared screw top allows for easy refill

• Detachable tap for easy cleaning
• BPA-free construction to avoid hazardous chemicals in drinking water
• Durable construction resists impact for a long service life
• Cap is secured to the bottle with a flexible band to avoid loss
• Available in 10, 15, 20 or 35 litres depending on your needs

Typical Applications
• Domestic
• Warehousing
• Facilities management
• Transport

Standards
• Food-Grade compatible (EU) No. 10/2011
• FDA 21 CFR 177.1520

M18 FMTIW2F12-0X0
• Up to 881Nm Breakaway Torque
• Up to 745Nm Fastening Torque
• Only 2.3kg w/ a 5.0Ah Battery

The CP7763/CP7773 Series impact wrench features 3/4" and 1" square drives and delivers reverse torque up to 1,630 Nm / 1,200 ft.lb. Designed for general maintenance and tire changing. Its twin hammer impact mechanism and its composite housing offer high durability in bolting & unbolting applications while also being lightweight and compact. Available in 6 models: 3/4" pistol short anvil, 3/4" pistol long anvil, 3/4" D-handle short anvil, 3/4" D-handle long anvil (6" anvil), 1" D-handle short anvil, and 1" D-handle long anvil (6" anvil).

he WeldSkill 180 is a single-phase welding inverter with a user-friendly control panel, a practical push-button operation for mode selection, clearly visible LED indicators and sturdy large control knob.

• Measure AC voltage and current without touching a live wire

• Troubleshoot with all power supply measurements at-a-glance

• See AC voltage and current values without test leads

FF-ZR
Flaps of high performance finishing web - perfect for decorative finishing and light deburring.

Features and Benefits
• Highly durable finishing brush
• Provides a consistent finish

• Membersihkan gumpalan lengket, kotoran, vernis, endapan timbal & karbon
• Mengatasi stater yang sulit, stasioner kasar, & kehilangan tenaga (stalling)
• Mengurangi emisi dan asap

Gembok LOTO, Dielectric ZenexThermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan tinggi Shackle 1-1/2in (38mm)

Fitur Produk:
• 410 adalah Gembok Pengaman Termoplastik
• Didesain khusus untuk aplikasi lockout tagout (LOTO)
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Silinder keamanan tinggi, disediakan untuk keselamatan
• Penahan kunci – memastikan gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Biru termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36

Fast measurement with one hand: The Dräger-Tube pump accuro allows you to use the established Dräger-Tubes to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.

This mobile workstation is part of our Ultimate Range which combines robust performance with stylish appearance and superior finish. Steel construction with 45mm ball bearing drawer slides and steel side handles. Anti-rust and solvent resistant powder coat finish. Quick lock function to prevent unwanted opening of drawers. Perforated sides for hanging accessories. Fitted with 2 x fixed castors and 2 x swivel castors with full brakes. Max drawer load: 45kg.

• All steel construction with Anti-rust and solvent resistant
• 45mm ball bearing drawer slides
• Quick lock function
• Perforated sides for hanging accessories
• Fitted with 2 x fixed and 2 x swivel castors with full brakes
• Max drawer load: 45kg
• 1123(W) x 791 (D) x 844 (H) mm

Typical Applications
• Portable option for using and transporting tools in work environments

SwissBurr B10 hand deburring tools are a fast, effective and efficient way of deburring straight and hole edges. Their totally modular system of interchangeable handles, holders and blades designed to cover all applications. A choice of HSS, TiN or carbide blades are available to suit your specific application. They are incredibly versatile and interchangeable with commonly available brands including Kennedy, Noga, Ruko, Seco, Snap-Tap and Stellram.

Features and Benefits
• Modular system allows interchange of blades handles and holders to suit various applications
• A choice off HSS, carbide and TiN blades to suit requirements
• Compatible with commonly available brands

Typical Applications
• Deburring
• Straight edges
• Hole edges

Type of Luminaire : Smart Street Light
Set Model No : NSP10460LR
Type of Light Source : LED
Power Input : 90W
System Lumen Output : 16200 lm
System Efficacy : 180 lm/W
Lifetime : 50000H(L70)
CCT: 5000K
CRI : 70
Dimming : non-Dimmable
Glare Cut Angle : 30deg.
Beam Angle : 120deg.
IP Rating : 66
Ambient Temperature : 5 - 40°C
Dimensions : 340mmx703mmx132mm
Body : ADC & Aluminium Extrution