Produk

M18 FID2-0
• POWERSTATE™ Brushless Motor delivers up to 30% Faster Driving Speed, increasing user productivity
• Up to 25% More Torque with up to 226 Nm to complete more demanding applications
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power

• Pelumas & perlindungan lebih baik
• Lapisan film PTFE kering yang menahan kotoran, debu, dan minyak
• Untuk digunakan pada logam, plastik, & kaca
• Memperpanjang umur alat pemotong

This 12 Drawer tool chest is manufactured from heavy gauge steel with an electro-coated enamel finish for superior appearance and protection. Possessing steel panels in the drawers for extra rigidity, ball bearing drawer runners and drawer liners and top mat. Fully lockable, the product is finished in a red epoxy coat paint.

Features and Benefits
• Manufactured in heavy gauge steel for maximum durability
• Fully locking to effectively secure your tools
• Double wall construction side panels create reinforcement in areas that need it the most
• Welded joints for added rigidity and overall product longevity
• Coated in a hard wearing epoxy powder for resistance against corrosion as well as more general wear and tear
• Fully opening drawers for extra accessibility
• Quick release smooth running ball bearing drawer slides allow easy opening and closing of the drawers
• Double sliders on base drawer
• Supplied with top mat and drawer liners to protect the chest construction

Contents
• (1x) 280 x 410 x 100mm drawer dimensions
• (1x) 590 x 410 x 100mm drawer dimensions
• (2x) 590 x 410 x 50mm drawer dimensions
• (8x) 125 x 410 x 50mm drawer dimensions

Typical Applications
• Warehousing
• Garages
• Workshops

Type of Luminaire : Smart Street Light
Set Model No : NSP10460LR
Type of Light Source : LED
Power Input : 50W
System Lumen Output : 7500 lm
System Efficacy : 150 lm/W
Lifetime : 50000H(L70)
CCT: 5000K
CRI : 70
Dimming : non-Dimmable
Glare Cut Angle : 32deg.
Beam Angle : 117deg.
IP Rating : 66
Ambient Temperature : 5 - 40°C
Dimensions : 625mmx1630mmx269mm
Body : ADC & Aluminium Extrution

Provide extra grip on smooth surfaces. Hard wearing, durable and easily installed.

General purpose - ideal for stairways, ramps, ladders and machine footplates.
Coarse - ideal for indoor and outdoor use.

The CIGWELD TRANSMIG 175i+ is a self-contained single phase multiprocess welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes.
The unit is equipped with an integrated wire feed unit, voltage reduction device (VRD applicable in Stick mode only), digital voltage and amperage meters, and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.
• 185A (MIG Mode) 3-in-1 MIG / Stick / Lift TIG Inverter Welder
• Digital Amperage and Voltage Meters
• Highly portable with carrying handle, carry strap and under 15kg
• Full multi-process capabilities; MIG, Stick and Lift TIG
• Integrated Wire Feed Unit ‰ Spools up to 5kg or 200mm
• Standards compliant VRD
• Fully compliant to AS 60974.1-2006. Enclosure Rated to IP23S – Designed for Indoor & Outdoor use.
• Arc Control (Inductance) for adjusting the intensity of the arc
• Adjustable Burnback Control for controlling MIG wire stick out
• Euro MIG Torch Connection
• Accepts Mechafin style 2R feed rolls
• Robust 50mmå_ Dinse twist lock connections
• 3 Year Limited Warranty

DB-WL
Non-woven open mesh nylon abrasive provides a consistent finish and light stock removal. Non-aggressive wheel structure makes it perfect for deburring, blending, cleaning, polishing, deflashing plastics, removing oxides etc.

Suitable for all bench/pedestal grinders and polishers. Eye guards and tool rests are not essential for this product.

Features and Benefits
• Hard density, highly conformable wheel performs effective burr removal without undercutting the workpiece
• Convolute construction keeps the wheel running smooth, producing consistent results over time
• Scotch-Brite™ non-woven material resists loading and continuously supplies fresh abrasives for continuous high performance cutting action
• Resulting finish may negate subsequent conditioning steps
• Minimises heat build up to reduce risk of discolouration and warping on heat sensitive substrates
• Effective for all types of metals, composites, and glass, allowing one wheel to perform more tasks

Comprising of an enamel finish and a heavy-gauge, seamless metal body, these oil cans are suited for heavy-duty applications. Each can has a positive force feed brass pump and valve and is supplied with both rigid metal and flexible nylon threaded spouts. Finished in a red colour.

Features and Benefits
• Enamel finish provides additional protection against wear and tear
• Heavy gauge construction makes for a robust and resilient product
• Supplied with one metal and one flexible nylon spout for versatility
• Available in a range of sizes to suit your requirements

Typical Applications
• Automotive
• Construction

Recommended for simple, low cost removal of broken screws and bolts, these 4 and 6 piece sets from Kennedy are the ideal way to extract screws. designed to remove broken screws without damaging the threads of the component, each set has varying sizes to ensure you find the right size based on your needs.

Features and Benefits
• Available as a 4 or 6 piece set to sllow you to select the product most relevant to your needs
• An economic, easy way to replace broken screws without damaging the component
• Packaging has easy read labeling to inform you of the recommended drill size to fit the extractor best
• Sizes compatible with drills are as follows (in), no.1 - 5/64, no.2 - 7/64, no.3 - 5/32, no.4 - 1/4, no.5 - 19/64, no.6 - 13/32

Contents
• 4 Piece Set Sizes: No. 2, 3, 4 and 5
• 6 Piece Set Sizes: No. 1, 2, 3, 4, 5 and 6

Typical Applications
• Ideal for removing broken or damaged screws from materials without damaging the thread

Designed for tire changing applications with a torque limited in forward to 60-70 ft. Lbs / 90-140 Nm and a maximum torque in reverse of 920 ft.lbs / 1,250 Nm, the CP7748TL series limits the risk of over tightening during the tightening phase while also being very powerful when nuts or bolts have to be removed. In addition, the new forward/reverse system & power control (ring system) increase operator comfort while also improving functionality. The CP7748TL Series is composed of 2 models: 1/2" short anvil and 1/2" long anvil (2" anvil)

Air flow test tubes can be used universally: Simple and easy to use for the identification of air flows movements.

• OpenJaw™ design: measure current without breaking the circuit

• Tester automatically selects AC or DC voltage, up to 1000 V

• Work in tight spaces with detachable Slim Reach probe tips