Produk

Increased robustness thanks to the powerful 1-1/2" impact wrench, designed with oil bath twin hammer clutch mechanism, aluminium body, and clutch housing. With a maximum reverse torque of up to 3,900 Nm / 2,875 ft.lb., the CP6930-D35 is the ideal solution for maintenance applications. It is reversible and its steel trigger allows makes it easy to use in the bolting phases. The CP6930-D35 is equipped with a hole socket retainer for maximum safety.

This 1/4" & 3/8" butterfly impact wrenches series, designed for tight applications is highly recommended. The double rocking dog impact mechanism and metal motor housing offer high durability. High productivity is ensured with a torque of 80 ft.lbs / 110 Nm. The CP7711/CP7721 series consists of 2 models: 1/4" short anvil and 3/8" short anvil.

The CP721 Series 3/8" impact wrench offers a rocking dog mechanism and a metal motor housing for high durability and smooth operation. High productivity is ensured with a torque of 75 ft.lbs / 102 Nm while also being compact and comfortable to use.

RP250

Used for dispensing lubricants and disel, this cast iron pump with a steel suction tube and spout is the easy way to control the flow of said liquids. Suitable for container size of 200 litres, the pump possesses an inlet of 2" BSP and M59 x 5 male thread.

Features and Benefits
• Cast iron pump with steel suction tube and spout making for a hardy product
• Suited for use on a 200 lite capacity barrel
• With a 980mm tube to easily dispense liquids when necessary

Typical Applications
• Suited for controlling the flow of fluids in a 200 litre barrel

The CP772 Series is the "Classic" 3/4" impact wrench, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

This 3/8" and 1/2" impact wrench series, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability is highly recommended. High productivity in loosening and tightening nuts, while also being both compact and comfortable. The CP724/CP726 Series consists of 2 sizes : 3/8" short anvil and 1/2" short anvil.

The "Classic" reference in the 1/2" impact wrench range, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

CP749 Series 1/2" impact wrench belongs to our Classic range. With its patented clutch mechanism in oil bath and metal motor housing, it is renowned for its durability. Efficient loosening and tightening of nuts is ensured with a torque of 610 ft.lbs / 827 Nm. The CP749 Series consists of 2 models: 1/2" short anvil and 1/2" long anvil.

Solid brass body with a hardened stainless steel changeable shackle and a double locking mechanism. Fitted with a hardened steel cover plate and an anti-pick 6 pin brass cylinder. Completely weatherproof padlock which is suitable for use in the harshest corrosive conditions on minimum to medium
security items. Key change every 20,000.

Our 3/4" -1" high torque impact wrench CP6763/CP6773 Series is designed for the toughest environments and bolting applications. The twin hammer clutch mechanism, with aluminum body and steel clutch housing delivers a high power-to-weight ratio for demanding industrial environments. The motor provides up to 1630, 1760 Nm/1200, 1300 ft.lbs of max reverse torque. Available in 4 models: The 3/4" and 1" pistol handles feature a compact design and allow easy access due to the short side-to-center position.

M18 FSAGV100XB-0X0
• Generates Corded Power - Powerful POWERSTATE™ Brushless Motor spins at 8,500 RPM and allows the user to complete the toughest grinding and cutting applications
• Increased Control - Variable speed control for applications that require lower RPM grinding; 3500 - 8500 RPM
• 5 Speed Settings