Produk

The Matlock® range of Solid Brass Padlocks is designed to provide minimum to medium-security for indoor and outdoor use on garages, cabinets, toolboxes, gates, truck doors, lockers, sheds, and bicycles.

Features and Benefits
• Hardened steel shackle for security
• Suitable for use both indoor and outdoor
• Available in 3 or 4 digit combinations

Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Features straight shanks and manufactured to BS 328 : Part 5 : 1983.

• Single hole head with nclusive angle of 90° for excellent cutting performance
• Manufactured from M35 HSS for increased toughness
• Uncoated with good heat and wear resistance

Typical Applications
•Countersinking

Standards
• Manufactured to BS 328 : Part 5 : 1983

This 3/8" and 1/2" impact wrench series, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability is highly recommended. High productivity in loosening and tightening nuts, while also being both compact and comfortable. The CP724/CP726 Series consists of 2 sizes : 3/8" short anvil and 1/2" short anvil.

The "Classic" reference in the 1/2" impact wrench range, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

CP749 Series 1/2" impact wrench belongs to our Classic range. With its patented clutch mechanism in oil bath and metal motor housing, it is renowned for its durability. Efficient loosening and tightening of nuts is ensured with a torque of 610 ft.lbs / 827 Nm. The CP749 Series consists of 2 models: 1/2" short anvil and 1/2" long anvil.

Key features
• Powerful, easy-to-use, high-accuracy temperature calibrator
• Test and calibrate temperature sensors and transmitters
• Measures 4 to 20 mA loops and can provide loop power
• Measures RTDs, thermocouples, ohms, and volts
• Source/simulates thermocouples, RTDs, volts, and ohms

Solid brass body with a hardened stainless steel changeable shackle and a double locking mechanism. Fitted with a hardened steel cover plate and an anti-pick 6 pin brass cylinder. Completely weatherproof padlock which is suitable for use in the harshest corrosive conditions on minimum to medium
security items. Key change every 20,000.

Our 3/4" -1" high torque impact wrench CP6763/CP6773 Series is designed for the toughest environments and bolting applications. The twin hammer clutch mechanism, with aluminum body and steel clutch housing delivers a high power-to-weight ratio for demanding industrial environments. The motor provides up to 1630, 1760 Nm/1200, 1300 ft.lbs of max reverse torque. Available in 4 models: The 3/4" and 1" pistol handles feature a compact design and allow easy access due to the short side-to-center position.

M18 PAL-0
• 1500 Lumens of TRUEVIEW™ High Definition Output
• Powerful Magnetic base
• 2" Spring Loaded Clamp

M18 FSAGV100XB-0X0
• Generates Corded Power - Powerful POWERSTATE™ Brushless Motor spins at 8,500 RPM and allows the user to complete the toughest grinding and cutting applications
• Increased Control - Variable speed control for applications that require lower RPM grinding; 3500 - 8500 RPM
• 5 Speed Settings

Supplied in a moulded plastic carry case, this set of 4 circlip pliers is the ideal product for the removal and insertion of circlips. Manufactured from specially selected steels combined with a dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Finished with a double polished head, joint and an induction hardened cutting edge. Features pliers for both external and internal circlips.

Features and Benefits
• Supplied in a plastic moulded carry case for ease of storage, organisation and transportation of your tools
• 4 piece set ensures you always have the correct set of circlip pliers no matter the application
• Handles have a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip
• Pliers are manufactured from specially selected steels designed for strength
• Double polished head and joint to repel dirt
• Induction-hardened cutting edges that hold over time even with frequent use

Contents
• External straight jaw, 10 - 25mm and 19 - 40mm
• Internal straight jaw, 10 - 25mm and 12 - 65mm

Typical Applications
• Used to remove and insert both external and internal circlips which are commonly used in the automotive industry as well as being suitable for production line environments where repetitive work is undertaken